Original scientific paper
https://doi.org/10.15255/KUI.2026.035
Effect of Print Orientation and Post-Curing on the Properties of Parts Produced by Digital Light Processing
Marijan-Pere Marković
; University of Zagreb Faculty of Chemical Engineering and Technology, Trg Marka Marulića 19, 10 000 Zagreb, Croatia
*
Lara Štorga
; University of Zagreb Faculty of Chemical Engineering and Technology, Trg Marka Marulića 19, 10 000 Zagreb, Croatia
Elizabeta Forjan
; University of Zagreb Faculty of Chemical Engineering and Technology, Trg Marka Marulića 19, 10 000 Zagreb, Croatia
Domagoj Vrsaljko
; University of Zagreb Faculty of Chemical Engineering and Technology, Trg Marka Marulića 19, 10 000 Zagreb, Croatia
* Corresponding author.
Abstract
Additive manufacturing (3D printing) is a layer-by-layer fabrication technique that enables the production of complex geometries from digital computer-aided design (CAD) models. In digital light processing (DLP) technology, the model is converted into sliced layers and manufactured by the selective photopolymerisation of a liquid resin using projected light.
This study investigates how processing conditions and post-curing influence the properties of an acrylate-based photopolymer resin (AnyCubic 3D Printing UV Sensitive Resin) used in DLP 3D printing. The effects of printing orientation (0°, 45°, and 90°) and post-curing duration (0, 5, and 15 min) in a 405 nm chamber were analysed in terms of mechanical performance, thermal response, and chemical resistance.
The experimental results indicated that printing orientation and post-curing time play a significant role in determining the mechanical and chemical behaviour of the material. Samples printed at 90° relative to the print bed exhibited the highest tensile strength (53.9 MPa) and fracture resistance (53.3 MPa), whereas 0° oriented samples showed the highest Young's modulus (1184 MPa). Solvent uptake was highest in acetone (11 %) and methanol (10 %), and decreased with post-curing time. Thermal analysis showed only minor changes in glass transition temperature (49.1–53.5 °C), while FTIR spectra revealed no significant differences related to post-curing conditions. Overall, the findings highlighted that mechanical and chemical properties of DLP-printed structures can be effectively tuned through printing orientation and post-curing strategy, while thermal properties remain unaffected.
Keywords
additive manufacturing; digital light processing; printing orientation; post-curing
Hrčak ID:
353576
URI
Publication date:
21.11.2026.
Visits: 0 *