Tehnički glasnik, Vol. 20 No. 1, 2026.
Prethodno priopćenje
https://doi.org/10.31803/tg-20240404220017
Experimental Investigation on Material Removal Rate and Tool Wear Rate for Machining Metal Matrix Composites in EDM Process
Abbas Fadhil Ibrahim
orcid.org/0000-0002-6814-2801
; Production Engineering and Metallurgy, University of Technology, Baghdad, Iraq
*
Shakir M. Mousa
; Al-Furat Al-Awsat Technical University, Technical Institute of Al-Mussaib, Babylon, Iraq
Semyan Omed Alyousifi
; Manufacturing Department, Duhok Technical Institute, Zakho Way Road, Duhok, Iraq
Diana Abed al Kareem Noori
; Production Engineering and Metallurgy, University of Technology, Baghdad, Iraq
* Dopisni autor.
Sažetak
Electrical discharge machining (EDM) is one of non-traditional cutting method or manufacturing process for processing brittle and solid materials like composite materials and other difficult to machine materials. It is most usually utilized to manufacture metal matrix composites (MMCs) and is very solid materials. Aluminum based MMCs are to a large degree utilized in defense and aviation parts for their advanced and new characteristics like strength to weight ratio, high rigidity etc. The aluminum alloy 6061 and 7.5% SiC has been used as a workpiece and copper as a tool electrode, discharge current (Ip), pulse on-time (Ton), and pulse off-time (Toff) were selected as machining dependent variables for this study. The dependent variables were tool wear rate (TWR) and material removal rate (MRR). The experiments are planned using Box-Behnken design. Empirical models are developed for MRR and TWR using the analysis of variance (ANOVA) and regression models. The getted results showed that the MRR is increasing with increasing in Ip and Ton while TWR is decreasing when Ip and Ton is increase.
Ključne riječi
analysis of variance; electrical discharge machining; material removal rate; tool wear rate
Hrčak ID:
344764
URI
Datum izdavanja:
13.3.2026.
Posjeta: 374 *