Skip to the main content

Metallurgy , Vol. 57 No. 4, 2018.

  • Publication date: 01.10.2018.
  • Published on HRČAK: 19.06.2018.

Table of contents

Full text

Kinetics of pellet reduced by H2 and the mixture of CO and H2 (page 219-222)

S. Geng, H. Zhang, W. Ding, Y. Yu
Original scientific paper


Simulation study on the jet characteristics of coherent jet oxygen lance used in basic oxygen furnace (BOF) (page 223-225)

L. H. Feng, X. B. Kang, H. K. Liang, G. L. Liu, C. Sun
Original scientific paper


Qualitative characteristics of foundry dusts (page 226-230)

K. Nowacki, T. Lis
Original scientific paper


Monte carlo simulation of anisotropic growth of grains during liquid phase sintering for ceramics (page 231-234)

J. Li, C. F. Zhang, R. M. Yin, W. H. Zhang
Original scientific paper


Simulation study on the solute elements micro-segregation at solid-liquid interface of continuous casting steel slab (page 235-238)

L. H. Feng, M. Y. Zhu, X. B. Kang, L. Luo
Original scientific paper


Co-pyrolysis kinetics analysis of stone coal and biomass for vanadium extraction (page 239-241)

G. Q. Liu, K. Liu, Y. K. Gao, G. Chen
Original scientific paper


Effects of real welding parameters of high-strength S1100QL steel on hardness and impact energy properties (page 242-244)

M. Dunđer, I. Samardžić, A. Ćorić, G. Salopek
Original scientific paper


Mechanism research on eliminating voids in bearing steel ball by floating-pressure method (FPM) (page 245-248)

D. Y. Tian, X. D. Shu, C. Xu
Original scientific paper


Effect of yttrium oxide modification of Al-Si alloy on microhardness and microstructure of surface layers (page 253-256)

S. V. Konovalov, D. V. Zagulyaev, Y. F. Ivanov, V. E. Gromov
Original scientific paper


Investigation on removal of Nb from Nb-bearing hot metal with CO2 (page 257-260)

Z. Y. Xu, J. N. Huang, B. W. Li, Z. W. Zhao
Original scientific paper


Effect of ultrasound on Ni-Co/ZrO2 composite electrodeposition and corrosion resistance study of coatings (page 261-264)

X. Y. Zhou, Y. Y. Wang, H. Jin, Z. P. Liang, X. L. Liu
Original scientific paper


Prediction of mechanical properties of β-SiAlON ceramics based on BP neural network (page 265-268)

J. Li, C. F. Zhang, R. M. Yin, W. H. Zhang
Original scientific paper


Effect of ultrasonic power on corrosion resistance and hardness of Ni-Co- Al2O3 nanocomposite coatings (page 269-271)

H. Jin, L. J. Chen, X. Y. Zhou, Y. Y. Wang
Original scientific paper


Thermo-mechanical process parameters effect on a 9 % Cr-2 % W steel (page 272-274)

A. Di Schino, R. Rufini
Original scientific paper


Research of the plastic deformation localization of bimetal (page 275-278)

S. Barannikova, Yu. Li, L. Zuev
Original scientific paper


Industrial control measurements of high chromium steel rolls heat treatment (page 279-282)

B. Karpe, S. Novak, A. Nagode, S. Kožuh, A. Pavlič, S. Rečnik, B. Kosec
Original scientific paper


Research on cold rolling of 41Cr4/20NiCrMo7 bimetal composite bearing ring (page 283-286)

B. S. Sun, C. W. Wang, Z. L. Zhao
Original scientific paper


Investigation of thermal behavior of α-PbO and β-PbO in O2 atmosphere (page 287-290)

S. A. A. Sajadi, A. Nazari Alavi, M. Mirzai
Original scientific paper


Fuzzy grey relational analysis for influence factors on the quality of calcined petroleum coke (page 291-294)

J. D. Huang, J. Li, L. X. Li
Original scientific paper


Effect of shot peening at different almen intensities on fatigue behavior of AISI 304 (page 295-298)

P. T. Iswanto, H. Akhyar, F. F. Utomo
Original scientific paper


Structural-phase state of the system “CdO-Ag coating / copper substrate” formed by electroexplosive method (page 299-302)

D. A. Romanov, S. V. Moskovskii, E. A. Martusevich, E. A. Gayevoy, V. E. Gromov
Original scientific paper


Analysis of friction coefficient for a base steel 5 % Cr, applying variable loads of 196 N, 294 N and 392 N, and speeds of 0,18 m/sec, 0,36 m/sec and 0,54 m/sec (page 303-306)

R. Servin, I. Calderon, A. Perez, F. Equihua, L. Falcon, M. Garcia, P. Orozco
Original scientific paper


Quenching and tempering (Q&T) effect on a steel for forging with Cr and Mo addition (page 307-309)

A. Di Schino, M. Corradi
Original scientific paper


Studying vibration mode impact on forming steel structure in primary crystallization process (page 310-312)

M. K. Ibatov, A. Z. Issagulov, Sv. S. Kvon, V. Yu. Kulikov, A. M. Dostayeva, Ye. P. Chsherbakova
Preliminary communication


Studying structure and properties of shaped ingots obtained in various conditions of crystallization (page 313-316)

Sv. S. Kvon, V. Yu. Kulikov, A. Z. Issagulov, A. M. Dostayeva, T. V. Коvalyova
Preliminary communication


Fatigue crack growth behavior of nodular cast iron subjected to two-step austempering (page 317-320)

Andoko, P. Puspitasari, F. Gapsari
Preliminary communication


Effect of reducing agent’s nature on the microstructure and certain properties of 30CrNi2Мo high-quality steel (page 321-323)

A. Z. Issagulov, T. S. Makaev, M. K. Ibatov, Sv. S. Kvon, V. Yu. Kulikov, A. M. Dostayeva
Preliminary communication


Discrepancies analysis of casts of diesel engine piston (page 324-326)

A. Pacana, K. Czerwińska, L. Bednarova
Preliminary communication


Analysis of plated layer’s effects on the structure resistance to corrosion (page 327-329)

T. Šolić, D. Marić, M. Duspara, I. Samardžić
Preliminary communication


Research into possibilities of reducing the X155CrVMo12-1 tool steel fragility (page 330-332)

V. Marušić, A. Milinović, I. Opačak, I. Putnik
Preliminary communication


Corrosion behavior of brass in nitric acid (page 333-336)

F. Gapsari, Andoko, H. Wijaya
Preliminary communication


Methodology of design of the thin steel strip cold rolling energy efficient technology (page 337-340)

A. Kozhevnikov, I. Kozhevnikova, N. Bolobanova, D. Shalaevskii
Preliminary communication


Experimental stand for investigation of induction hardening of steel elements (page 341-344)

J. Barglik, A. Smalcerz, A. Smagor, G. Kopec
Preliminary communication


Processing of rare metals containing waste of copper production (page 345-348)

A. K. Serikbayeva, F. A. Berdikulova, K. K. Mamyrbayeva, Sh. K. Akilbekova
Preliminary communication


Monitoring the process of anodising of VW70U pistons using the control chart (page 349-352)

A. Pacana, A. Gazda, N. Życzyński
Preliminary communication


Advantages and effectiveness of the powder metallurgy in manufacturing technologies (page 353-356)

A. Panda, J. Dobransky, M. Jančik, I. Pandova, M. Kačalova
Review article


Lüders bands at the beginning of the plastic flow of materials (page 357-359)

T. Brlić, S. Rešković, F. Vodopivec, I. Jandrlić
Review article


Estimation of factors and projected growth of the metallurgical branch of Russia under unstable market conditions (page 360-362)

N. A. Kazakova, A. L. Gendon, N. V. Sedova, E. A. Khlevnaya
Review article


Heat treatment of steel products as an example of transport phenomenon in porous media (page 363-366)

C. Kolmasiak, T. Wyleciał
Review article


Competency model for science and technology (S&T) personnel for the iron and steel industry (page 367-370)

A. Kozhevnikov, N. Bolobanova, I. Kozhevnikova
Review article


Acknowledgement to reviewers, Metalurgija 57 (2018) 1-4, 1-376 (page 375-375)

I. Mamuzić
Acknowledgement


Visits: 59.637 *