Skoči na glavni sadržaj

Engineering Review : Međunarodni časopis namijenjen publiciranju originalnih istraživanja s aspekta analize konstrukcija, materijala i novih tehnologija u području strojarstva, brodogradnje, temeljnih tehničkih znanosti, elektrotehnike, računarstva i građevinarstva, Vol. 42 No. 2, 2022.

Izvorni znanstveni članak

https://doi.org/10.30765/er.1698

A sector in-plane finite element for analysis of multi-layer cylinders exposed to pressure and thermal loading

Asma Bouzeriba orcid id orcid.org/0000-0001-8219-5275 ; Department of Science and Technology, Institute of Science and Technology, Mechanical Engineering Materials and Structures Laboratory, El-Wancharissi University Center, Tissemsilt, Algeria.
Cherif Bouzrira ; Department of Civil Engineering,Institute of Science and Technology, Mohammed Seddik Ben Yahia University , Jijel, Ouled Aissa,P.B.18000, Jijel, Algeria.

Puni tekst: engleski pdf 386 Kb

str. 37-49

preuzimanja: 252

citiraj

Sažetak

In this paper, analysis of multi-layer cylinders exposed to pressure and thermal loading is considered using a sector element based on the strain approach. Materials in cylinder layers have been assumed to be linearly elastic, homogeneous, and isotropic. The sector in-plane finite element employed is defined in the polar coordinate system with three degrees of freedom at each corner node (the two translations and the in-plane rotation). The results of displacement and stresses obtained in the present paper are compared with the analytical solutions, and a good accuracy shown.

Ključne riječi

multi-layer cylinder; pressure; sector element; strain-based finite element; homogeneous

Hrčak ID:

274278

URI

https://hrcak.srce.hr/274278

Datum izdavanja:

21.2.2022.

Posjeta: 753 *