Izvorni znanstveni članak
https://doi.org/10.30765/er.1779
Sensitivity optimization method for 4th order CBQ structure LP filter
Even Živić
; Technical Department, Tehnomont Shipyard Pula Ltd., Fižela 6, Pula, Croatia
Nino Stojković
orcid.org/0000-0001-9343-1739
; Department of Electric Power System, Faculty of Engineering, University of Rijeka, Vukovarska 58, Rijeka, Croatia
Saša Sladić
; Department of Electric Power System, Faculty of Engineering, University of Rijeka, Vukovarska 58, Rijeka, Croatia
Sažetak
This paper describes the design and optimization method for a 4th order low-pass filter designed as a cascade of biquarts and approximated by Butterworth. Schoeffler sensitivity, multiparameter sensitivity measurement, and Monte Carlo analysis were used for sensitivity measurement, filter tuning, and optimization confirmation. The constraints on the filter characteristics due to the Butterworth approximation are also presented, together with the constraints on optimization to obtain a narrow range of values for the filter elements. Three different types of optimization parameters were used to confirm the optimization method. Finally, a 4th order low pass filter with a cascade structure of biquarts was compared to a 4th order filter without feedback and confirmed to have lower sensitivity.
Ključne riječi
optimization; 4th order low-pass filter; CBQ structure; sensitivity; Monte Carlo analysis; multi-parameter sensitivity measure
Hrčak ID:
286585
URI
Datum izdavanja:
21.2.2022.
Posjeta: 907 *