Skoči na glavni sadržaj

Izvorni znanstveni članak

Microstructure and Mechanical Properties of Friction Stir Welded AlMg4.5Mn Alloy

Damjan Klobčar orcid id ; Fakulteta za strojništvo, Univerza v Ljubljani
Ladislav Kosec ; Naravoslovnotehniška fakulteta, Univerza v Ljubljani
Tomaž Pepelnjak ; Fakulteta za strojništvo, Univerza v Ljubljani
Janez Tušek ; Fakulteta za strojništvo, Univerza v Ljubljani

Puni tekst: engleski pdf 370 Kb

str. 104-110

preuzimanja: 958



A comprehensive research of Friction Stir Welding of 4 mm thick sheet aluminium alloy (AlMg4.5Mn) for forming was done. A vast variety of process parameters was tested according to the plan of experiments at constant 2° tilt angle. Specially designed tensile test specimens were sectioned perpendicularly to the welding direction. The microstructure was prepared for the observation on a light microscope under the polarized light source. Vickers micro-hardness was measured. The results show the influence of FSW process parameters on the formation of the microstructure and mechanical properties.

Ključne riječi

friction stir welding, AlMg4.5Mn, welding parameters, mechanical properties, weld failures

Hrčak ID:



Posjeta: 1.288 *