Skoči na glavni sadržaj

Metalurgija , Vol. 54 No. 2, 2015.

  • Datum izdavanja: 01.04.2015.
  • Objavljen na Hrčku: 25.10.2014.

Sadržaj

Puni tekst

Thermal analysis and kinetics of the chalcopyrite-pyrite concentrate oxidation process (str. 311-314)

A. Mitovski, N. Štrbac, D. Manasijević, M. Sokić, A. Daković, D. Živković, Lj. Balanović
Izvorni znanstveni članak

engleski pdf 151kb
Analysis of modern methods of assessing the quality of sand foundry moulds (str. 315-318)

K. Smyksy, J. Zych, T. Snopkiewicz
Izvorni znanstveni članak

engleski pdf 280kb
Setting temperature for thermal reclamation of used moulding sands on the basis of thermal analysis (str. 319-322)

M. Łucarz
Izvorni znanstveni članak

engleski pdf 328kb
Application of thermodynamic calculations in the research of cast irons structure (str. 323-326)

J. Hampl, T. Elbel, T. Valek
Izvorni znanstveni članak

engleski pdf 175kb
Analysis of the effects of electromagnetic stirring on solidification structure of bearing steel (str. 327-330)

B. Wang, Z. G. Yang, X. F. Zhang, Y. T. Wang, C. P. Nie, Q. Liu, H. B. Dong
Izvorni znanstveni članak

engleski pdf 224kb
Numerical model of the diode laser overlapped remelting of structural steel (str. 331-334)

H. Chmelíčková, H. Šebestová, M. Havelková, H. Hiklová, J. Tomáštík
Izvorni znanstveni članak

engleski pdf 536kb
Effect of microstructure on tensile properties of austenite-ferrite welded joint (str. 335-338)

R. Bakić, M. O. Abukresh, A. Sedmak, I Samardžić, R. Jovičić
Izvorni znanstveni članak

engleski pdf 613kb
Studies of the quality and cost-effectiveness of a novel concept of open-die forged powerplant main shaft (str. 339-342)

P. Skubisz, Ł. Lisiecki, J. Sińczak
Izvorni znanstveni članak

engleski pdf 299kb
Flank wear and surface roughness in end milling of hardened steel (str. 343-346)

S. Jozić, D. Bajić, A. Stoić
Izvorni znanstveni članak

engleski pdf 399kb
Determination of electrical properties of materials used in microwave heating of foundry moulds and cores (str. 347-349)

B. Opyd, K. Granat, D. Nowak
Prethodno priopćenje

engleski pdf 178kb
Influence of waxes remelting used in investment casting on their thermal properties and linear shrinkage (str. 350-352)

K. Grzeskowiak, D. Czarnecka-Komorowska, K. Sytek, M. Wojciechowski
Prethodno priopćenje

engleski pdf 218kb
Examination and analysis of influence of compaction degree on dielectricproperties of moulding sand components (str. 353-356)

D. Nowak, K. Granat, B. Opyd
Prethodno priopćenje

engleski pdf 250kb
Modelling of non-metallic particles motion process in foundry alloys (str. 357-360)

P. L. Żak, D. Kalisz, J. Lelito, M. Szucki, B. Gracz, J. S. Suchy
Prethodno priopćenje

engleski pdf 258kb
An attempt to use the coherence function for testing the structure of saturated composite castings (str. 361-364)

A. Bejger, K. Gawdzińska
Prethodno priopćenje

engleski pdf 326kb
Parameters of a gas-solids JET in pneumatic powder injection into liquid alloys with a non-submerged lance (str. 365-367)

J. Jezierski, K. Janerka
Prethodno priopćenje

engleski pdf 202kb
Reduction of chromium oxides with calcium carbide during thestainless steelmaking process (str. 368-370)

B. Arh, F. Vode, F. Tehovnik, J. Burja
Prethodno priopćenje

engleski pdf 228kb
Submerged entry nozzle clogging during continuous casting of Al-killed steel (str. 371-374)

F. Tehovnik, J. Burja, B. Arh, M. Knap
Prethodno priopćenje

engleski pdf 331kb
Modelling of the crystallization front – particles interactions in ZnAl/(SiC)p composites (str. 375-378)

M. Szucki, D. Kalisz, J. Lelito, P. L. Żak, J. S. Suchy, K. W. Krajewski
Prethodno priopćenje

engleski pdf 150kb
Microstructural characterisation of chromium slags (str. 379-382)

J. Burja, F. Tehovnik, F. Vode, B. Arh
Prethodno priopćenje

engleski pdf 297kb
Researches and studies regarding brazed aluminium alloys microstructure used in aeronautic industry (str. 383-386)

A. Dimitrescu, D. F. Niţoi, D. Dobrotă, Z. Apostolescu
Prethodno priopćenje

engleski pdf 636kb
Welding defects at friction stir welding (str. 387-389)

P. Podržaj, B. Jerman, D. Klobčar
Prethodno priopćenje

engleski pdf 269kb
Influence of parameters of welding regime on metallographic structure of materials from a joint welded in corner in „T” form (str. 390-394)

V. Petrescu, D. Dobrotă
Prethodno priopćenje

engleski pdf 568kb
Researches on corrosion cracking phenomenon that occurs on welded of agricultural equipment (str. 395-398)

I. Sărăcin, G. Paraschiv, O. Pandia, I. Bozgă, D. Toma
Prethodno priopćenje

engleski pdf 239kb
The possibility of tribopair lifetime extending by welding of quenched and tempered stainless steel with quenched and tempered carbon steel (str. 399-402)

V. Marušić, I. Samardžić, I. Budić, L. Marušić
Prethodno priopćenje

engleski pdf 350kb
Dependence of hardness and impact energy on cooling time Δt8/5and temperature for S960QL (str. 403-406)

I. Samardžić, M. Dunđer, T. Vuherer
Prethodno priopćenje

engleski pdf 185kb
Photoluminescence and concentration quenching of Pr3+ doped BaTa2O6 phosphor (str. 407-410)

M. Ilhan, R. Samur, H. Demirer, F. Mindivan
Prethodno priopćenje

engleski pdf 273kb
Bond strength of plasma sprayed ceramic coatings on the phosphated steels (str. 411-414)

P. Pokorny, L. Mastny, V. Sykora, Z. Pala, V. Brozek
Prethodno priopćenje

engleski pdf 267kb
Analysis of the technology of rolling 5,5 mm-diameter wire rod of cold upsetting steel in the morgan block mill (str. 415-418)

K. Laber, H. Dyja, M. Kałamorz
Prethodno priopćenje

engleski pdf 210kb
Experimental study of rotary compression for hollow parts (str. 419-422)

Z. Pater, J. Tomczak, T. Bulzak
Prethodno priopćenje

engleski pdf 247kb
Analysis of shear deformation scheme efficiency in plastic structure formation processes (str. 423-425)

G. I. Raab, A. G. Raab, V. G. Shibakov
Pregledni rad

engleski pdf 219kb
Competitiveness and sustainability – a modern economic approach to the industrial policy (str. 426-428)

V. A. Popescu, Gh. N. Popescu, C. R. Popescu
Pregledni rad

engleski pdf 96kb
The human role in a progressive trend of foundry automation (str. 429-432)

A. Misztal, M. Butlewski, A. Jasiak, S. Janik
Pregledni rad

engleski pdf 131kb
Environmental aspects of innovation and new technology implementation in metallurgy industry (str. 433-436)

I. Kłosok-Bazan, B. Gajdzik, J. Machnik-Słomka, W. Ocieczek
Pregledni rad

engleski pdf 108kb
Economic value added in metallurgy and mining sector in Poland (str. 437-440)

A. Bluszcz, A. Kijewska, A. Sojda
Pregledni rad

engleski pdf 139kb
Challenges of sustainable development in the mining and metallurgy sector in Poland (str. 441-444)

A. Bluszcz, A. Kijewska
Pregledni rad

engleski pdf 113kb
Metallurgical industry in Romania in the context of the economic crisis (str. 445-448)

M. Zaharia, A. G. Babucea, A. Bălăcescu, C. I. Răbonţu
Stručni rad

engleski pdf 142kb
Environmental failure mode and effects analysis (FMEA) – a new approach to methodology (str. 449-451)

M. Roszak, M. Spilka, A. Kania
Stručni rad

engleski pdf 103kb
New additional important information to authors (str. 452-452)


Ostalo

engleski pdf 108kb

Posjeta: 90.675 *