Skip to the main content

Metallurgy , Vol. 54 No. 2, 2015.

  • Publication date: 01.04.2015.
  • Published on HRČAK: 25.10.2014.

Table of contents

Full text

Thermal analysis and kinetics of the chalcopyrite-pyrite concentrate oxidation process (page 311-314)

A. Mitovski, N. Štrbac, D. Manasijević, M. Sokić, A. Daković, D. Živković, Lj. Balanović
Original scientific paper


Analysis of modern methods of assessing the quality of sand foundry moulds (page 315-318)

K. Smyksy, J. Zych, T. Snopkiewicz
Original scientific paper


Application of thermodynamic calculations in the research of cast irons structure (page 323-326)

J. Hampl, T. Elbel, T. Valek
Original scientific paper


Analysis of the effects of electromagnetic stirring on solidification structure of bearing steel (page 327-330)

B. Wang, Z. G. Yang, X. F. Zhang, Y. T. Wang, C. P. Nie, Q. Liu, H. B. Dong
Original scientific paper


Numerical model of the diode laser overlapped remelting of structural steel (page 331-334)

H. Chmelíčková, H. Šebestová, M. Havelková, H. Hiklová, J. Tomáštík
Original scientific paper


Effect of microstructure on tensile properties of austenite-ferrite welded joint (page 335-338)

R. Bakić, M. O. Abukresh, A. Sedmak, I Samardžić, R. Jovičić
Original scientific paper


Studies of the quality and cost-effectiveness of a novel concept of open-die forged powerplant main shaft (page 339-342)

P. Skubisz, Ł. Lisiecki, J. Sińczak
Original scientific paper


Flank wear and surface roughness in end milling of hardened steel (page 343-346)

S. Jozić, D. Bajić, A. Stoić
Original scientific paper


Determination of electrical properties of materials used in microwave heating of foundry moulds and cores (page 347-349)

B. Opyd, K. Granat, D. Nowak
Preliminary communication


Influence of waxes remelting used in investment casting on their thermal properties and linear shrinkage (page 350-352)

K. Grzeskowiak, D. Czarnecka-Komorowska, K. Sytek, M. Wojciechowski
Preliminary communication


Modelling of non-metallic particles motion process in foundry alloys (page 357-360)

P. L. Żak, D. Kalisz, J. Lelito, M. Szucki, B. Gracz, J. S. Suchy
Preliminary communication


An attempt to use the coherence function for testing the structure of saturated composite castings (page 361-364)

A. Bejger, K. Gawdzińska
Preliminary communication


Reduction of chromium oxides with calcium carbide during thestainless steelmaking process (page 368-370)

B. Arh, F. Vode, F. Tehovnik, J. Burja
Preliminary communication


Submerged entry nozzle clogging during continuous casting of Al-killed steel (page 371-374)

F. Tehovnik, J. Burja, B. Arh, M. Knap
Preliminary communication


Modelling of the crystallization front – particles interactions in ZnAl/(SiC)p composites (page 375-378)

M. Szucki, D. Kalisz, J. Lelito, P. L. Żak, J. S. Suchy, K. W. Krajewski
Preliminary communication


Microstructural characterisation of chromium slags (page 379-382)

J. Burja, F. Tehovnik, F. Vode, B. Arh
Preliminary communication


Researches and studies regarding brazed aluminium alloys microstructure used in aeronautic industry (page 383-386)

A. Dimitrescu, D. F. Niţoi, D. Dobrotă, Z. Apostolescu
Preliminary communication


Welding defects at friction stir welding (page 387-389)

P. Podržaj, B. Jerman, D. Klobčar
Preliminary communication


Researches on corrosion cracking phenomenon that occurs on welded of agricultural equipment (page 395-398)

I. Sărăcin, G. Paraschiv, O. Pandia, I. Bozgă, D. Toma
Preliminary communication


The possibility of tribopair lifetime extending by welding of quenched and tempered stainless steel with quenched and tempered carbon steel (page 399-402)

V. Marušić, I. Samardžić, I. Budić, L. Marušić
Preliminary communication


Dependence of hardness and impact energy on cooling time Δt8/5and temperature for S960QL (page 403-406)

I. Samardžić, M. Dunđer, T. Vuherer
Preliminary communication


Photoluminescence and concentration quenching of Pr3+ doped BaTa2O6 phosphor (page 407-410)

M. Ilhan, R. Samur, H. Demirer, F. Mindivan
Preliminary communication


Bond strength of plasma sprayed ceramic coatings on the phosphated steels (page 411-414)

P. Pokorny, L. Mastny, V. Sykora, Z. Pala, V. Brozek
Preliminary communication


Analysis of the technology of rolling 5,5 mm-diameter wire rod of cold upsetting steel in the morgan block mill (page 415-418)

K. Laber, H. Dyja, M. Kałamorz
Preliminary communication


Experimental study of rotary compression for hollow parts (page 419-422)

Z. Pater, J. Tomczak, T. Bulzak
Preliminary communication


Analysis of shear deformation scheme efficiency in plastic structure formation processes (page 423-425)

G. I. Raab, A. G. Raab, V. G. Shibakov
Review article


Competitiveness and sustainability – a modern economic approach to the industrial policy (page 426-428)

V. A. Popescu, Gh. N. Popescu, C. R. Popescu
Review article


The human role in a progressive trend of foundry automation (page 429-432)

A. Misztal, M. Butlewski, A. Jasiak, S. Janik
Review article


Environmental aspects of innovation and new technology implementation in metallurgy industry (page 433-436)

I. Kłosok-Bazan, B. Gajdzik, J. Machnik-Słomka, W. Ocieczek
Review article


Economic value added in metallurgy and mining sector in Poland (page 437-440)

A. Bluszcz, A. Kijewska, A. Sojda
Review article


Challenges of sustainable development in the mining and metallurgy sector in Poland (page 441-444)

A. Bluszcz, A. Kijewska
Review article


Metallurgical industry in Romania in the context of the economic crisis (page 445-448)

M. Zaharia, A. G. Babucea, A. Bălăcescu, C. I. Răbonţu
Professional paper


Environmental failure mode and effects analysis (FMEA) – a new approach to methodology (page 449-451)

M. Roszak, M. Spilka, A. Kania
Professional paper


Visits: 90.675 *