Skoči na glavni sadržaj

Engineering Review : Međunarodni časopis namijenjen publiciranju originalnih istraživanja s aspekta analize konstrukcija, materijala i novih tehnologija u području strojarstva, brodogradnje, temeljnih tehničkih znanosti, elektrotehnike, računarstva i građevinarstva, Vol. 41 No. 3, 2021.

Izvorni znanstveni članak

https://doi.org/10.30765/er.1577

Corrosion investigations of Al-Si casting alloys in 0.6 M NaCl solution

Sunčana Smokvina Hanza orcid id orcid.org/0000-0003-2415-6088 ; Department of Materials Science and Engineering, Faculty of Engineering, University of Rijeka, Vukovarska 58, HR-51000 Rijeka, Croatia
Ladislav Vrsalović orcid id orcid.org/0000-0001-6111-5475 ; Department of Electrochemistry and Materials Protection, Faculty of Chemistry and Technology, University of Split, Ruđera Boškovića 35, HR-21000 Split, Croatia
Lovro Štic orcid id orcid.org/0000-0002-8523-5401 ; Department of Materials Science and Engineering, Faculty of Engineering, University of Rijeka, Vukovarska 58, HR-51000 Rijeka, Croatia
Lovro Liverić orcid id orcid.org/0000-0001-8714-6771 ; Department of Materials Science and Engineering, Faculty of Engineering, University of Rijeka, Vukovarska 58, HR-51000 Rijeka, Croatia

Puni tekst: engleski pdf 815 Kb

str. 115-123

preuzimanja: 749

citiraj

Sažetak

This paper presents results of the corrosion investigations of specimens made from finished parts for the automotive industry, produced by high-pressure die casting and gravity die casting process of six Al-Si alloys (40000 series). Open circuit potential and potentiodynamic polarization measurements have been performed using a potentiostat with three-electrode set-up in 0.6 M NaCl naturally aerated solution. Microstructural characterization before and after electrochemical investigations has been carried out with optical microscope to establish the connection between microstructure and corrosion parameters of investigated alloys and to analyze and record surface changes of each sample due to electrochemical corrosion. All alloys show good corrosion resistance, which manifests with low values of corrosion rates, calculated from the corrosion current densities obtained from potentiodynamic polarization measurements. Differences in electrochemical behavior appear due to the distinctions in their chemical composition and microstructure. The type of casting process does not affect electrochemical behavior of Al-Si alloys.

Ključne riječi

aluminium alloys; microstructure; electrochemical methods; corrosion; polarization

Hrčak ID:

251349

URI

https://hrcak.srce.hr/251349

Datum izdavanja:

20.12.2021.

Posjeta: 1.972 *