Skip to the main content

Metallurgy , Vol. 56 No. 1-2, 2017.

  • Publication date: 02.01.2017.
  • Published on HRČAK: 20.11.2016.

Table of contents

Full text

An investigation of the decomposition mechanism of calcium carbonate (page 9-12)

D. Wang, Z. Zhao, G. L. Tan, S. Zhang, Q. Wang
Original scientific paper


Precipitation of metallic chromium during rapid cooling of Cr2O3 slags (page 13-16)

J. Burja, F. Tehovnik, F. Vode, M. Godec, B. Arh, J. Medved
Original scientific paper


Effect of compaction degree on permittivity of water-glass containing moulding sand (page 17-20)

B. Gal, K. Granat, D. Nowak
Original scientific paper


The identification of pyrolysis products of the alphaset binder with gas chromatography/mass spectrometry (page 21-24)

A. Kmita, A. Roczniak, M. Holtzer
Original scientific paper


Low and high frequency fatigue tests of nodular cast irons (page 25-28)

A. Vaško, J. Belan, L. Kuchariková, E. Tillová
Original scientific paper


Zinc ferrite nanoparticles as perspective functional materials for applications in casting technologies (page 29-32)

A. Kmita, J. Żukrowski, K. Hodor, H. Smogór, M. Sikora
Original scientific paper


The effect of high-frequencies loading on the fatigue cracking of nodular cast iron (page 33-36)

R. Ulewicz, P. Tomski
Original scientific paper


Investigation of gaseous desiliconization in basic oxygen furnace (BOF) (page 37-39)

W. W. Mao, C. X. Li, H. Lu, H. Li
Original scientific paper


Change of mould flux properties during continuous casting of ferritic stainless steel (page 40-42)

B. Arh, F. Tehovnik, F. Vode
Original scientific paper


Studying as - cast microstructure of the cold core (CC) ingot (page 43-46)

X. J. Zhang, C. J. Xu, Z. Y. Wang, J. Li, L. W. Zhang, X. D. Peng
Original scientific paper


Influence of laser surface hardening on corrosion properties of Al-Zn-Si cast alloy (page 47-50)

E. Tillová, L. Kuchariková, M. Chalupová, J. Belan, A. Vaško, I. Švecová
Original scientific paper


Determination of the content of silicon carbide by mass balance and analysis of oxygen and carbon content (page 51-54)

J. Węgrzyn, A. Mościcki, T. Borecki
Original scientific paper


The interaction between diamond like carbon (DLC) coatings and ionic liquids under boundary lubrication conditions (page 55-58)

K. Milewski, J. Kudliński, M. Madej, D. Ozimina
Original scientific paper


Effect of cladding parameters on the hardness of bimetal plates (page 59-62)

R. Bęczkowski
Original scientific paper


Precipitation of σ phase in superaustenitic stainless steel UHB 904L (page 63-66)

F. Tehovnik, J. Burja, B. Arh, F. Vode
Original scientific paper


Relationship between crystallographic texture and cavitation resistance of as-cast X8CrNi25-21 and X6CrAl13 steels (page 67-70)

R. Jasionowski, W. Polkowski, D. Zasada
Original scientific paper


Thermal and phase transformations analysis in a PREMOMET® steel (page 71-74)

M. Torres-López, L. Guerra-Fuentes, L. Y. Gomez-Zamorano, M. A. L. Hernandez-Rodriguez, E. Garcia-Sanchez
Original scientific paper


Properties of low-alloy high-speed steel at elevated temperature (page 75-78)

J. Jaworski, T. Trzepieciński
Original scientific paper


Incorporation of tungsten metal fibers in a metal and ceramic matrix (page 79-82)

V. Brozek, M. Vokac, J. Kolisko, P. Pokorny, T. F. Kubatik
Original scientific paper


The effect of the properties of the metal matrix on the retention of a diamond particle (page 83-86)

J. Borowiecka-Jamrozek, J. Lachowski
Original scientific paper


Influence of heat treatment and KIc/HRc ratio on the dynamic wear properties of coated high speed steel (page 87-90)

M. Sedlaček, B. Podgornik, D. Česnik
Original scientific paper


Comparative study of TIG and SMAW root welding passes on ductile iron cast weldability (page 91-93)

J. Cárcel-Carrasco, M. Pascual, M. Pérez-Puig, F. Segovia
Original scientific paper


Research of weld joint fatigue life of the AlMgSi07.F25 aluminium alloy under bending-torsion cyclic loading (page 94-98)

M. Vaško, M. Blatnický, P. Kopas, M. Sága
Original scientific paper


Identification of mechanical properties of weld joints of AlMgSi07.F25 aluminium alloy (page 99-102)

P. Kopas, M. Blatnický, M. Sága, M. Vaško
Original scientific paper


Research of the plastic flow of electrolytically saturated with hydrogen (He) Al-Cu-Mg alloy (page 103-106)

S. Barannikova, A. Bochkareva, Li, A. Lunev, G. Shlyakhova, L. Zuev
Original scientific paper


Lumped parameter model with inner state variables for modeling hot deformability of steels (page 111-114)

F. Vode, J. Burja, F. Tehovnik, B. Arh
Original scientific paper


Fatigue life of high strength steel for cold forming (page 115-118)

R. Ulewicz, F. Novy
Original scientific paper


Ultrafinegrained structure of D16 aluminium alloy after rolling in the corrugated rolls and on the longitudinal-wedge mill (page 119-122)

A. Mashekova, A. Turdaliev, A. Kawalek, S. Mashekov, U. Murzakhmetova, L. Kurmangaliyeva, N. Smagulova
Original scientific paper


Study on the control of end quality by one closed cross wedge rolling based wedge block (page 123-126)

X. D. Shu, J. Wei, C. Liu
Original scientific paper


Mathematical simulation for effects of flow control devices in two-strand slab tundish (page 127-130)

Q. Yue, C. B. Zhang, X. Z. Wang
Original scientific paper


The optimization of the production of sinter as the feedstock of the blast furnace process (page 131-134)

P. Besta, P. Wicher
Preliminary communication


Enhancing surface roughness of castings when sand-resin mold casting (page 135-138)

T. Kovalyova, E. Eremin, S. Arinova, I. Medvedeva, A. Dostayeva
Preliminary communication


Some aspects of model calculations of converter slag reduction process (page 139-141)

E. Kolczyk, Z. Miczkowski, J. Czernecki
Preliminary communication


Determination of physico-chemical properties of fine-grained waste from the cleaning of iron casting (page 142-144)

T. Lis, K. Nowacki, K. Łakomy
Preliminary communication


Quantitative assessment of Aluminium cast Alloys` structural parameters to optimize ITS properties (page 145-148)

L. Kuchariková, E. Tillová, J. Belan, A. Vaško, I. Švecová
Preliminary communication


Influece of the austempering temperature on the tensile strength of the austempered ductile iron (ADI) samples (page 149-152)

S. Savićević, H. Avdušinović, A. Gigović-Gekić, Z. Jurković, M. Vukčević, M. Janjić
Preliminary communication


Comparative study of copper (II) removal/recovery from aqueous solutions by bulk liquid membranes containing six different carriers (page 153-156)

L. León, G. León, J. Senent, M. A. Guzmán
Preliminary communication


Thermodynamic study of metal sulphides conversion to oxides in hydrometallurgy (page 157-160)

J. Bocan, M. Sidorová, M. Šofranko
Preliminary communication


Design of C-TYPE passive filter for arc furnaces (page 161-163)

R. Klempka
Preliminary communication


Monitoring the intensity of mechanical vibration during the processing of chrome steel 14109 (page 164-166)

Š. Salokyová, J. Dobránsky, A. Panda
Preliminary communication


The influence of applied heat-treatment on in 718 fatigue life at three point flexural bending (page 167-170)

J. Belan, L. Kuchariková, E. Tillová, A. Vaško
Preliminary communication


Physiochemical properties of TiO2 nanoparticle thin films deposited on stainless steel (page 171-174)

M. Basiaga, W. Walke, D. Nakonieczny, A. Hyla
Preliminary communication


Methodology for repeated load analysis of composite structures with embedded magnetic microwires (page 175-178)

K. Semrád, K. Draganová
Preliminary communication


The influence of drawing speed on surface topography of high carbon steel wires (page 182-184)

M. Suliga
Preliminary communication


Technological parameters optimization of the AlZn5Mg3Cu alloy thermomechanical treatment process (page 185-187)

M. I. Neacșu, E. R. Chiriac, A. Chiriac, O. Pandia, I. Saracin
Preliminary communication


Environmental assessment of the hot-dip galvanization processes (page 188-190)

T. Karkoszka
Preliminary communication


The characterisation of pure titanium for biomedical applications (page 191-194)

G. Gałuszka, M. Madej, D. Ozimina, J. Kasińska, R. Gałuszka
Preliminary communication


The characterisation of the microstructure and mechanical properties of diamond - like carbon (DLC) for endoprosthesis (page 195-198)

R. Gałuszka, M. Madej, D. Ozimina, A. Krzyszkowski, G. Gałuszka
Preliminary communication


The effect of cross rolling on the microstructure of ferrous and non-ferrous metals and alloys (page 199-202)

A. B. Naizabekov, S. N. Lezhnev, H. Dyja, T. Bajor, K. Tsay, A. Arbuz, N. Gusseynov, R. Nemkaeva
Preliminary communication


Comparison of the thermoelastic phenomenon expressions in stainless steels during cyclic loading (page 203-206)

M. Sapieta, A. Sapietova, V. Dekys
Preliminary communication


Weldability investigation on real welded plates of fine-grained high-strength steel S960QL (page 207-210)

I. Samardžić, M. Dunđer, M. Katinić, N. Krnić
Preliminary communication


The study on an automotive refill opening cap preforming process based on single point incremental forming (page 211-214)

A. Zhiguo, L. Zhengfang, F. Tianhua, Q. Jianjian
Preliminary communication


Experimental research on the influence of soaking aging type on some mechanical properties of the alloy AlZn5,7MgCu (page 215-218)

M. I. Neacșu, R. E. Chiriac, A. Chiriac, O. Pandia, I. Saracin
Preliminary communication


The continual chemical changing aspects in metallurgy production scheduling (page 219-222)

D. Malindžák, P. Kačmáry, B. Zatwarnicka-Madura, D. Zimon
Preliminary communication


The failure analysis of the holder of a crusher moving knife (page 226-228)

M. Pástor, P. Trebuňa, F. Trebuňa, F. Šimčák
Preliminary communication


Process check of annealing process of coiled sheets by indirect measurement (page 229-232)

K. Kostúr
Preliminary communication


The analysis of failure causes of the rotor shaft of steam turbines (page 233-236)

P. Trebuňa, M. Pástor, F. Trebuňa, F. Šimčák
Preliminary communication


Spatial variability change of MgO content in Jelsava magnesite deposit (Slovakia) (page 237-240)

J. Kondela, S. Jacko, L. Vizi
Preliminary communication


Economic evaluation of investment project in the area of sheet metal processing (page 245-248)

P. Trebuňa, A. Petriková, M. Pekarčíková, M. Petrik, R. Popovič
Preliminary communication


Metallurgy in the Czech Republic: a spatio-temporal view (page 249-251)

J. Suchacek, A. Samolejova, P. Seda
Preliminary communication


Interdependence between the steel castings and manufacture of machines and equipment (page 252-254)

L. Paliu-Popa, I. E. Chirtoc, G. Bușan, A. V. Todoruț
Review article


Modern trends and challenges of development of global aluminum industry (page 255-258)

M. N. Dudin, N. A. Voykova, E. E. Frolova, J. A. Artemieva, E. P. Rusakova, A. H. Abashidze
Review article


CO2 abatement in the iron and steel industry - the case for carbon capture and storage (CCS) (page 259-261)

A. V. Todorut, D. Cirtina, L. M. Cirtina
Review article


The technology transfer of non-ferrous alloys casting during the middle age (page 262-264)

A. Garbacz-Klempka, M. Wołoszyn, T. Dzieńkowski, Z. Kwak, P. Długosz, K. Saja
Review article


Environment-friendly management of iron-bearing metallurgical waste (page 269-271)

K. Nowacki, T. Lis, H. Kania
Review article


Safety performance indicators in the metallurgical industry using WEB programming (page 272-274)

M. Cioca, L. Ivascu, L. I. Cioca
Review article


Mobbing and harassment in the steel enterprises (page 275-278)

J. Vveinhardt, W. Sroka
Review article


Prognostic modeling of total global steel production (page 279-282)

B. Gajdzik
Review article


Acknowledgement to reviewers - Metalurgija 55 (2016) 1-4, 1-864 (page 283-283)

Ilija Mamuzić
Acknowledgement


Visits: 103.037 *