Skip to the main content

Metallurgy , Vol. 63 No. 1, 2024.

  • Publication date: 01.01.2024.
  • Published on HRČAK: 24.08.2023.

Table of contents

Full text

Modeling research on limitation of transition zone during continuous steel casting (page 3-5)

J. Pieprzyca, T. Merder, M. Saternus, M. Tkadlecková, J. Cupek, J. Walek
Original scientific paper


Optimization of flow field and numerical simulation of slag entrapment behavior in slab crystallizer (page 6-8)

Y. F. Wang, L. Y. Wang, Y. Q. Cai
Original scientific paper


Kinematics simulation of temperature measuring robot for steelmaking furnace (page 9-12)

J. R. Zhou, Y. Q. Cai, X. Liu
Original scientific paper


Study on the strength of iron and steel smelting waste blast furnace slag (page 13-16)

H. Z. Yang, Z. C. Liu
Original scientific paper


Finite time command filtered adaptive fuzzy control for a twin roll inclined casting system (page 17-20)

R. Wang, D. X. Gao, Y. J. Zhang
Original scientific paper


Flexible constant force grinding of rare earth metal ingot (page 21-24)

X. L. Dong, Q. K. Tu, Y. Q. Cai
Original scientific paper


Analysis of temperature field and thermal stress of molten iron slagging-off robot arm (page 25-27)

J. H. Peng, X. W. Cheng, J. Wang, L. C. Xiao
Original scientific paper


A YOLOV8-based approach for steel plate surface defect detection (page 28-30)

Z. H. Wei, Y. J. Zhang, X. J. Wang, J. T. Zhou, F. Q. Dou, Y. H. Xia
Original scientific paper


Ewaluation and analysis of the large-size forged and rolled en AW – 7057 alumminum alloy ring structure (page 31-34)

J. Lulkiewicz, B. Pachutko, A. Kawałek, T. Bajor, S. Szkudelski, Sz. Kajpust
Original scientific paper


Feasibility analysis of short process flexible precision forming of aluminum alloy automobile hollow shaft (page 35-38)

Y. M. Li, X. D. Shu, Q. Chen, Z. X. Li, H. J. Xu, Y. M. Deng
Original scientific paper


Study on mechanical properties of 6061-T6 aluminum alloy (page 39-42)

M. W. Liu
Original scientific paper


Tensile simulation of 6061 aluminum alloy (page 43-45)

Z. C. Fu, Z. L. Zhao, F. Wang, T. K. Li, Y. Guo, H. C. Ji
Original scientific paper


Preparation and performance study of magnetorheological (MR) foam (page 46-48)

J. F. Huang, Y. F. Meng
Original scientific paper


Effect of process parameters on forming quality of SiCp/TC11 titanium matrix composites by selective laser melting (SLM) (page 49-52)

X. B. Lu, X. D. Shu, S. Y. Chen, C. Xu, Z. X. Li, H. J. Xu
Original scientific paper


The influence of environmental conditions on the tribological properties of the Ti13Nb13Zr alloy (page 53-56)

K. Piotrowska, M. Madej, J. Kowalczyk, K. Radon-Kobus
Original scientific paper


Influence of surface roughness on selected properties of the TiAlN coating (page 57-60)

J. Kowalczyk, M. Madej, K. Piotrowska, K. Radon-Kobus
Original scientific paper


Feasibility study of SiCp reinforced TC11 titanium alloy under selective laser melting (page 61-64)

X. B. Lu, X. D. Shu, S. Y. Chen, Z. Y. Zheng, Z. X. Li, H. J. Xu
Original scientific paper


The influence of plasma nitriding on the microstructure of X153CrMoV12 and X165CrV12 steels (page 69-72)

M. Góral, M. Mokrzycka, A. Przybyło, M. Drajewicz, P. Kwasniewski, W. Głuchowski
Original scientific paper


High temperature plastic deformation constitutive model of Mg-Zn-Zr-Y alloy (page 73-76)

P. Huo, F. L. Zhang, X. Li
Original scientific paper


Effect of cold rolling process on texture evolution of gradient microstructure in Fe-3,0 % Si non-oriented silicon steel (page 77-80)

C. Xu, H. J. Xu, X. D. Shu, X. B. Lu, L. L. Jiang
Original scientific paper


Assessment of the properties of diamond-like carbon coatings (DLC) used in the lime industry (page 81-84)

K. Milewski, K. Piotrowska, M. Madej
Original scientific paper


Tribological properties of diamond-like-carbon coating doped with tungsten (page 85-88)

M. Madej, K. Radon-Kobus, K. Milewski, S. Drabik, K. Piotrowska, J. Kowalczyk
Original scientific paper


Johnson-Cook (JC) constitutive equation for ZGMn18 high manganese steel (page 89-92)

H. Y. Dong, X. W. Cheng, J. Wang, L. C. Xiao, M. P. Liu
Original scientific paper


Arrhenius constitutive model of FV520B steel (page 93-96)

J. Deng, L. W. Chen, B. Y. Cui, Y. P. Li, H. C. Ji
Original scientific paper


Effect of tempering temperature on microstructure and properties of 65Mn steel for metallurgical saw blade (page 97-100)

S. Y. Sui, Y. Wang, J. F. Chen
Original scientific paper


Theoretical calculation and simulation analysis of the enhanced crushing process of high nitrogen steel molten droplet (page 101-104)

D. J. Wang, C. Y. Song, Y. L. Gui, G. L. Ni, J. W. Liu, S. H. Wang
Original scientific paper


Mechanical bearing fault detection based on two-stage neural network (page 105-108)

X. Y. Fu, J. H. Zhao, Z. J. Chen
Original scientific paper


Thermal analysis of rare earth electrolytic robots under high temperature environment (page 109-112)

Y. Q. Cai, S. Y. Chen, S. Cai
Original scientific paper


Equilibrium moisture model of ceramic green body during drying (page 113-116)

P. Huo, J. S. Liu
Original scientific paper


Research on force control system of lead cathode leveler (page 117-120)

Y. F. Wang, Q. Q. Yin, Y. Q. Cai
Original scientific paper


Research on surface defect detection method of metallurgical saw blade based on YOLOV5 (page 121-124)

L. L. Meng, L. Zheng, X. Cui, R. Liu
Original scientific paper


Study on the mechanism of cobalt recovery from waste lithium cobaltate batteries in citric acid system (page 125-127)

X. Y. Liu, Y. Y. Wang, H. Jin
Original scientific paper


The influence of continuous casting and extrusion processes on the properties and structure of CuNi2Si alloy and the morphology of the Ni-Si phase precipitates (page 128-131)

S. Kordaszewski, M. Sadzikowski, G. Kiesiewicz, P. Kwasniewski, P. Noga, W. Sciezor, K. Franczak, A. Kawecki
Preliminary communication


In memory Josip Črnko (1943 – 2023) (page 132-132)

Ilija Mamuzić
In memoriam, Obituary


Research on automatic grinding platform for rare earth ingot casting (page 133-136)

X. Zhen, Y. Q. Cai, X. L. Dong, Q. K. Tu
Preliminary communication


Chemical sulfatization of chrome-containing sludges from DUBERSAY tailing dump (page 137-139)

E. Tastanov, A. Ultarakova, E. Kuldeyev, N. Sadykov, Zh. Yerzhanova, A. Tastanova
Preliminary communication


Numerical simulation and optimization of die casting for automotive shift tower cover (page 140-142)

X. X. Lu, X. D. Shu, C. Q. Dong, B. S. Sun, G. H. Li
Preliminary communication


Studying the binder effect on the properties of briquettes of ferroalloy production waste (page 143-145)

D. A. Issagulova, Sv. S. Kvon, A. E. Omarova, T. V. Kovaleva, V. Yu. Kulikov, A. A. Alina
Preliminary communication


Numerical simulation of welding of intersecting line joints of 6061-T6 aluminum alloy bicycle frame (page 149-152)

W. C. Pei, Y. Hu, G. F. Cui, H. C. Ji
Preliminary communication


Visits: 38.234 *