hrcak mascot   Srce   HID

Metalurgija, Vol. 53 No. 2, 2014.


Metalurgija,Vol. 53 No. 2
Datum izdavanja: travnja 2014.

Objavljen na Hrčku: 11. 11. 2013.
Sadržaj Puni tekst
Finite volume modeling of the solidification of an axial steel cast impeller (str.149-154) engleskipdf 501 KB
M. Copur, M. N. Eruslu
Izvorni znanstveni članak
 
Analysis of residence time distribution (RTD) curves for t-type tundish equipped in flow control devices: physical modelling (str.155-158) engleskipdf 497 KB
T. Merder, J. Pieprzyca, M. Saternus
Izvorni znanstveni članak
 
Utilization of casting ladle lining enthalpy for heating gas savings in the course of ladle preheating (str.159-162) engleskipdf 763 KB
D. Jančar, M. Klarova, P. Tvardek, J. Vlček, P. Hašek, F. Ovčačik
Izvorni znanstveni članak
 
Hydrogen embrittlement of duplex steel tested using slow strain rate test (str.163-166) engleskipdf 808 KB
P. Vaňova, J. Sojka
Izvorni znanstveni članak
 
Influence of the impurities on the depth of penetration with carbon steel weldings (str.167-170) engleskipdf 553 KB
O. Savytsky, M. Savytsky, D. Bajić, Y. Shkrabalyur
Izvorni znanstveni članak
 
Effect of nonmetallic inclusions on steel welds metal hot cracking (str.171-174) engleskipdf 489 KB
B. Zorc, M. Imamović, A. Nagode, A. Stoić, B. Kosec, I. Samardžić, L. Kosec
Izvorni znanstveni članak
 
Evaluation of creep properties of steel P92 and its welded joint (str.175-178) engleskipdf 479 KB
P. Mohyla, Z. Kubon, R. Cep, I. Samardzic
Izvorni znanstveni članak
 
Structural modifications which appear in the area of welds of welded structures made of ST 52.3 steel (str.179-182) engleskipdf 635 KB
D. Dobrotă
Izvorni znanstveni članak
 
Removal of fluoride from fluoride-bering cerium sulfate solution by hydrous zirconium oxide (str.183-185) engleskipdf 451 KB
J. G. He, Y. Li, X. X. Xue, H. Q. Ru, X. W. Huang, H. Yang
Izlaganje sa skupa
 
Influence of heat treatment on properties of ti-nb alloys (str.186-188) engleskipdf 500 KB
L. Kunčicka, P. Štěpan, J. Kliber, I. Mamuzić
Izvorni znanstveni članak
 
The analysis of particles emission during the process of grinding of steel EN 90MNV8 (str.189-192) engleskipdf 444 KB
M. Ilić, I. Budak, B. Kosec, A. Nagode, J. Hodolič
Izvorni znanstveni članak
 
The computer support of diagnostics of circle crystallizers (str.193-196) engleskipdf 746 KB
J. David, P. Švec, R. Frischer, R. Garzinova
Prethodno priopćenje
 
Processes at the inetrface molten metal-sand mold (str.197-200) engleskipdf 540 KB
Z. Janjušević, Z. Gulišija, M. Mihailović, A. Patarić
Prethodno priopćenje
 
Effects of high cooling rates on the improvement of continuous steel casting microstructure (str.201-204) engleskipdf 517 KB
A. Mahmutović
Prethodno priopćenje
 
Physical modelling of removing hydrogen from liquid aluminium conducted in URC-7000 reactor (str.205-208) engleskipdf 612 KB
M. Saternus, T. Merder, J. Pieprzyca
Prethodno priopćenje
 
The effect of crystallization conditions on tantalum distribution in molybdenum and tungsten during electron beam zone melting (str.209-211) engleskipdf 573 KB
J. K. Skotnicova, J. Drapala, M. Madaj, V. M. Kirillova
Prethodno priopćenje
 
The effect of austenitizing conditions in the ductile iron hardening process on longitudinal ultrasonic wave velocity (str.212-214) engleskipdf 564 KB
A. W. Orłowicz, M. Tupaj
Prethodno priopćenje
 
The role of a gas phase in the evaporation process of volatile components of the metal bath (str.215-217) engleskipdf 464 KB
J. Łabaj, G. Siwiec, L. Blacha, R. Burdzik
Prethodno priopćenje
 
Study of process parameters on aluminium foam formation in the Al-6Si-3Mg alloy (str.218-220) engleskipdf 379 KB
J. Juarez-Hernandez, R. Benavides-Trevino, O. Barceinas-Sanchez, M. Hernandez-Rodriguez, R. Almaguer
Prethodno priopćenje
 
Influence of heat treatment parameters on the mechanical properties of hypoeutectic Al-Si-Mg alloy (str.221-224) engleskipdf 607 KB
J. Pezda
Prethodno priopćenje
 
The effects of temperature on the kinetics of aluminium evaporation from the Ti-6Al-4V alloy (str.225-227) engleskipdf 443 KB
G. Siwiec, J. Mizera, D. Jama, A. Szmal, R. Burdzik
Prethodno priopćenje
 
Extraction of copper from solution after bioleaching of printed circuit boards (PCBs) (str.228-230) engleskipdf 303 KB
J. Willner, A. Fornalczyk
Prethodno priopćenje
 
Studying phase structure of burned ferrous manganese ores by method of nuclear gamma-resonance spectroscopy (str.231-234) engleskipdf 334 KB
B. Shayakhmetov, A. Issagulov, A. Baisanov, G. Karakeyeva, D. Issagulovа
Prethodno priopćenje
 
Comparison of heat effects associated with metal cutting method on ST 37 alloy steel (str.235-238) engleskipdf 499 KB
L. Dahil, İ. Dahil
Prethodno priopćenje
 
The influence of mixing water and abrasives on the quality of machined surface (str.239-242) engleskipdf 450 KB
A. Stoić, M. Duspara, B. Kosec, M. Stoić, I. Samardžić
Prethodno priopćenje
 
Suitability of heat treatment for crack resistance of material in the connection part of heavy transporter for liquid slag (str.243-246) engleskipdf 553 KB
T. Vuherer, M. Zrilić, Lj. Milović, I. Samardžić, V. Gliha
Prethodno priopćenje
 
Model of efficiency improvement in purchasing strategic raw material in a metallurgical company (str.247-250) engleskipdf 438 KB
A. Csikosova, M. Antošova, R. Weiss
Prethodno priopćenje
 
Finite element type of stress analysis for parts based on S235 JR steel welding (str.251-253) engleskipdf 401 KB
C. Babis, O. Chivu, D. Dobrotă
Prethodno priopćenje
 
Impact of climate changes on the european industry (str.254-256) engleskipdf 252 KB
K. Sienkiewicz-Małyjurek
Pregledni rad
 
Model of truly closed circuit of waste stream flow in metallurgical enterprise (str.257-260) engleskipdf 404 KB
B. Gajdzik, E. Michlowicz, B. Zwolińska, P. Kisiel
Pregledni rad
 
Elaborating a global diagnosis of a company in metallurgy industry (str.261-264) engleskipdf 433 KB
M.V. Achim, S.N. Borlea
Pregledni rad
 
The configurational approach in supply chain management (SCM) of steel goods (str.265-268) engleskipdf 293 KB
K. Dohn
Pregledni rad
 
Autonomous and professional maintenance in metallurgical enterprise as activities within total productive maintenance (str.269-272) engleskipdf 301 KB
B. Gajdzik
Pregledni rad
 
Effective recruitment method for the marketing department of a metallurgical enterprise (str.273-275) engleskipdf 475 KB
E. Jaba, A. Morosanu, D. Şerban, M. Gruiescu
Pregledni rad
 
Risk management in the planning of development projects in the industrial enterprises (str.276-278) engleskipdf 345 KB
J. Bijańska, K. Wodarski
Pregledni rad
 
Assessing bankruptcy risk for Romanian metallurgical companies (str.279-282) engleskipdf 444 KB
S.N. Borlea, M.V. Achim
Pregledni rad
 
Innovation of costing system in metallurgical companies (str.283-285) engleskipdf 289 KB
J. Kutač, K. Janovska, A. Samolejova, P. Besta
Stručni rad
 
Use of technical analysis indicators at trading shares of steel companies (str.286-288) engleskipdf 300 KB
J. Zuzik, R. Weiss, M. Antošova
Stručni rad
 
Posjeta: 37.608 *