Skoči na glavni sadržaj

Metalurgija , Vol. 63 No. 1, 2024.

  • Datum izdavanja: 01.01.2024.
  • Objavljen na Hrčku: 24.08.2023.

Sadržaj

Puni tekst

Modeling research on limitation of transition zone during continuous steel casting (str. 3-5)

J. Pieprzyca, T. Merder, M. Saternus, M. Tkadlecková, J. Cupek, J. Walek
Izvorni znanstveni članak


Optimization of flow field and numerical simulation of slag entrapment behavior in slab crystallizer (str. 6-8)

Y. F. Wang, L. Y. Wang, Y. Q. Cai
Izvorni znanstveni članak


Kinematics simulation of temperature measuring robot for steelmaking furnace (str. 9-12)

J. R. Zhou, Y. Q. Cai, X. Liu
Izvorni znanstveni članak


Study on the strength of iron and steel smelting waste blast furnace slag (str. 13-16)

H. Z. Yang, Z. C. Liu
Izvorni znanstveni članak


Finite time command filtered adaptive fuzzy control for a twin roll inclined casting system (str. 17-20)

R. Wang, D. X. Gao, Y. J. Zhang
Izvorni znanstveni članak


Flexible constant force grinding of rare earth metal ingot (str. 21-24)

X. L. Dong, Q. K. Tu, Y. Q. Cai
Izvorni znanstveni članak


Analysis of temperature field and thermal stress of molten iron slagging-off robot arm (str. 25-27)

J. H. Peng, X. W. Cheng, J. Wang, L. C. Xiao
Izvorni znanstveni članak


A YOLOV8-based approach for steel plate surface defect detection (str. 28-30)

Z. H. Wei, Y. J. Zhang, X. J. Wang, J. T. Zhou, F. Q. Dou, Y. H. Xia
Izvorni znanstveni članak


Ewaluation and analysis of the large-size forged and rolled en AW – 7057 alumminum alloy ring structure (str. 31-34)

J. Lulkiewicz, B. Pachutko, A. Kawałek, T. Bajor, S. Szkudelski, Sz. Kajpust
Izvorni znanstveni članak


Feasibility analysis of short process flexible precision forming of aluminum alloy automobile hollow shaft (str. 35-38)

Y. M. Li, X. D. Shu, Q. Chen, Z. X. Li, H. J. Xu, Y. M. Deng
Izvorni znanstveni članak


Study on mechanical properties of 6061-T6 aluminum alloy (str. 39-42)

M. W. Liu
Izvorni znanstveni članak


Tensile simulation of 6061 aluminum alloy (str. 43-45)

Z. C. Fu, Z. L. Zhao, F. Wang, T. K. Li, Y. Guo, H. C. Ji
Izvorni znanstveni članak


Preparation and performance study of magnetorheological (MR) foam (str. 46-48)

J. F. Huang, Y. F. Meng
Izvorni znanstveni članak


Effect of process parameters on forming quality of SiCp/TC11 titanium matrix composites by selective laser melting (SLM) (str. 49-52)

X. B. Lu, X. D. Shu, S. Y. Chen, C. Xu, Z. X. Li, H. J. Xu
Izvorni znanstveni članak


The influence of environmental conditions on the tribological properties of the Ti13Nb13Zr alloy (str. 53-56)

K. Piotrowska, M. Madej, J. Kowalczyk, K. Radon-Kobus
Izvorni znanstveni članak


Influence of surface roughness on selected properties of the TiAlN coating (str. 57-60)

J. Kowalczyk, M. Madej, K. Piotrowska, K. Radon-Kobus
Izvorni znanstveni članak


Feasibility study of SiCp reinforced TC11 titanium alloy under selective laser melting (str. 61-64)

X. B. Lu, X. D. Shu, S. Y. Chen, Z. Y. Zheng, Z. X. Li, H. J. Xu
Izvorni znanstveni članak


The influence of plasma nitriding on the microstructure of X153CrMoV12 and X165CrV12 steels (str. 69-72)

M. Góral, M. Mokrzycka, A. Przybyło, M. Drajewicz, P. Kwasniewski, W. Głuchowski
Izvorni znanstveni članak


High temperature plastic deformation constitutive model of Mg-Zn-Zr-Y alloy (str. 73-76)

P. Huo, F. L. Zhang, X. Li
Izvorni znanstveni članak


Effect of cold rolling process on texture evolution of gradient microstructure in Fe-3,0 % Si non-oriented silicon steel (str. 77-80)

C. Xu, H. J. Xu, X. D. Shu, X. B. Lu, L. L. Jiang
Izvorni znanstveni članak


Assessment of the properties of diamond-like carbon coatings (DLC) used in the lime industry (str. 81-84)

K. Milewski, K. Piotrowska, M. Madej
Izvorni znanstveni članak


Tribological properties of diamond-like-carbon coating doped with tungsten (str. 85-88)

M. Madej, K. Radon-Kobus, K. Milewski, S. Drabik, K. Piotrowska, J. Kowalczyk
Izvorni znanstveni članak


Johnson-Cook (JC) constitutive equation for ZGMn18 high manganese steel (str. 89-92)

H. Y. Dong, X. W. Cheng, J. Wang, L. C. Xiao, M. P. Liu
Izvorni znanstveni članak


Arrhenius constitutive model of FV520B steel (str. 93-96)

J. Deng, L. W. Chen, B. Y. Cui, Y. P. Li, H. C. Ji
Izvorni znanstveni članak


Effect of tempering temperature on microstructure and properties of 65Mn steel for metallurgical saw blade (str. 97-100)

S. Y. Sui, Y. Wang, J. F. Chen
Izvorni znanstveni članak


Theoretical calculation and simulation analysis of the enhanced crushing process of high nitrogen steel molten droplet (str. 101-104)

D. J. Wang, C. Y. Song, Y. L. Gui, G. L. Ni, J. W. Liu, S. H. Wang
Izvorni znanstveni članak


Mechanical bearing fault detection based on two-stage neural network (str. 105-108)

X. Y. Fu, J. H. Zhao, Z. J. Chen
Izvorni znanstveni članak


Thermal analysis of rare earth electrolytic robots under high temperature environment (str. 109-112)

Y. Q. Cai, S. Y. Chen, S. Cai
Izvorni znanstveni članak


Equilibrium moisture model of ceramic green body during drying (str. 113-116)

P. Huo, J. S. Liu
Izvorni znanstveni članak


Research on force control system of lead cathode leveler (str. 117-120)

Y. F. Wang, Q. Q. Yin, Y. Q. Cai
Izvorni znanstveni članak


Research on surface defect detection method of metallurgical saw blade based on YOLOV5 (str. 121-124)

L. L. Meng, L. Zheng, X. Cui, R. Liu
Izvorni znanstveni članak


Study on the mechanism of cobalt recovery from waste lithium cobaltate batteries in citric acid system (str. 125-127)

X. Y. Liu, Y. Y. Wang, H. Jin
Izvorni znanstveni članak


The influence of continuous casting and extrusion processes on the properties and structure of CuNi2Si alloy and the morphology of the Ni-Si phase precipitates (str. 128-131)

S. Kordaszewski, M. Sadzikowski, G. Kiesiewicz, P. Kwasniewski, P. Noga, W. Sciezor, K. Franczak, A. Kawecki
Prethodno priopćenje


In memory Josip Črnko (1943 – 2023) (str. 132-132)

Ilija Mamuzić
In memoriam, Nekrolog, Obituarij


Research on automatic grinding platform for rare earth ingot casting (str. 133-136)

X. Zhen, Y. Q. Cai, X. L. Dong, Q. K. Tu
Prethodno priopćenje


Chemical sulfatization of chrome-containing sludges from DUBERSAY tailing dump (str. 137-139)

E. Tastanov, A. Ultarakova, E. Kuldeyev, N. Sadykov, Zh. Yerzhanova, A. Tastanova
Prethodno priopćenje


Numerical simulation and optimization of die casting for automotive shift tower cover (str. 140-142)

X. X. Lu, X. D. Shu, C. Q. Dong, B. S. Sun, G. H. Li
Prethodno priopćenje


Studying the binder effect on the properties of briquettes of ferroalloy production waste (str. 143-145)

D. A. Issagulova, Sv. S. Kvon, A. E. Omarova, T. V. Kovaleva, V. Yu. Kulikov, A. A. Alina
Prethodno priopćenje


Numerical simulation of welding of intersecting line joints of 6061-T6 aluminum alloy bicycle frame (str. 149-152)

W. C. Pei, Y. Hu, G. F. Cui, H. C. Ji
Prethodno priopćenje


Posjeta: 16.353 *