Skip to the main content

Technical gazette , Vol. 20 No. 6, 2013.

  • Publication date: 20.12.2013.
  • Published on HRČAK: 18.12.2013.

Table of contents

Full text

A novel walker with mechanically established walking and standing mechanism (page 927-931)

Raša Andrejević, Goran Šiniković, Miša Stojićević, Miodrag Stoimenov, Ljubomir Miladinović, Branislav Popkonstantinović, Gordana Ostojić, Stevan Stankovski
Original scientific paper


Experimental tool life tests of indexable inserts for stainless steel machining (page 933-940)

Robert Čep, Adam Janásek, Aleš Slíva, Miroslav Neslušan, Martin Binder
Original scientific paper


Analytical and numerical stress analysis of the rotary kiln ring (page 941-946)

Alma Žiga, Aleksandar Karač, Dušan Vukojević
Original scientific paper


Critical PPP/PFI project success criteria for public sector clients (page 947-954)

Danijel Kušljić, Saša Marenjak
Original scientific paper


Neural network based estimation of resonant frequency of an equilateral triangular microstrip patch antenna (page 955-960)

Kamil Yavuz Kapusuz, Hakan Tora, Sultan Can
Original scientific paper


Volatility forecast based on intelligent EGARCH error correction model (page 961-968)

Liqiang Hou, Shanlin Yang
Original scientific paper


A novel load flow algorithm for radial distribution networks with dispersed generation (page 969-977)

Rene Prenc, Davor Škrlec, Vitomir Komen
Original scientific paper


Fluvial deposition in groyne fields of the middle course of the Danube River (page 979-983)

Radovan Savić, Gabrijel Ondrašek, Atila Bezdan, Ljubomir Letić, Vesna Nikolić
Original scientific paper


Estimating a PDF of parameters of oxide inclusions on fatigue fracture surface of standardized specimen (page 985-993)

Ana Bižal, Jernej Klemenc, Matija Fajdiga
Original scientific paper


Determining the stability of novel external fixator by using measuring system Aramis (page 995-999)

Arsen Pavić, Janoš Kodvanj, Martin Surjak
Original scientific paper


Comparative analysis of limit bearing capacity of frames depending on the character of the load (page 1001-1009)

Bojan Milošević, Marina Mijalković, Žarko Petrović, Mirza Hadžimujović, Biljana Mladenović
Original scientific paper


Identification of injury risk in building construction – education, experience and type of work (page 1011-1017)

Vladimir Mučenski, Igor Peško, Milan Trivunić, Goran Cirović, Jasmina Dražić
Original scientific paper


Predicting of milling forces in a virtual manufacturing system (page 1027-1035)

Branko Kokotović, Miloš Glavonjić
Original scientific paper


The level of correlation between cultural values and system of customer relationship management (page 1037-1042)

Stevan Milisavljević, Slavica Mitrović, Leposava Grubić Nešić, Goran Šimunović, Dražan Kozak, Aco Antić
Original scientific paper


Synchronized phasor measurements in a dual layer hybrid state estimator (page 1043-1050)

Vedran Kirincic, Srdjan Skok, Hrvoje Bulat
Original scientific paper


Ranking of factors on efficiency and effectiveness of the process quality management system certification according to the external auditors' evaluation (page 1051-1055)

Đuro Tunjić, Leon Maglić, Živko Kondić, Milan Kljajin, Veljko Kondić
Original scientific paper


Comparison of complexity indicators for assessing general process structures (page 1057-1062)

Vladimir Modrak, David Marton, Slavomir Bednar
Original scientific paper


Real time contour based ceramic tile edge and corner defects detection (page 1063-1070)

Tomislav Matić, Ivan Vidović, Željko Hocenski
Original scientific paper


A combined principal component analysis-regression analysis model to study the effect on technical efficiency of bad loans in bank industry (page 1071-1075)

Omid Mashhadifarahani, Narges Rezavi, Loghman Hatami-Shirkouhi
Original scientific paper


Influence of cutting parameters and conditions onto surface hardness of Duplex Stainless Steel after turning process (page 1077-1080)

Grzegorz Krolczyk, Stanislaw Legutko, Antun Stoić
Original scientific paper


Use of coolants and lubricants in hard machining (page 1081-1086)

János Kundrák, Gyula Varga
Preliminary communication


Compression methods for image processing implementation into the low capacity devices (page 1087-1090)

Roman Slaby, Radim Hercik, Zdenek Machacek
Preliminary communication


Structural life assessment of oil rig pipes made of API J55 steel by high frequency welding (page 1091-1094)

Ljubica Lazić Vulićević, Miodrag Arsić, Živče Šarkoćević, Aleksandar Sedmak, Marko Rakin
Preliminary communication


Production and application of metal foams in casting technology (page 1095-1102)

Branko Bauer, Slobodan Kralj, Matija Bušić
Review article


LinuxCNC – the enhanced machine controller: application and an overview (page 1103-1110)

Tomislav Staroveški, Danko Brezak, Toma Udiljak
Review article


Application of geophysical investigations in underground engineering (page 1111-1117)

Meho Saša Kovačević, Danijela Marčić, Mario Gazdek
Review article


Critical measures of success for a software project (page 1119-1127)

Ninoslav Slavek, Damir Blažević, Krešimir Nenadić
Professional paper


Visits: 119.519 *