Skoči na glavni sadržaj

Tehnički vjesnik , Vol. 20 No. 6, 2013.

  • Datum izdavanja: 20.12.2013.
  • Objavljen na Hrčku: 18.12.2013.

Sadržaj

Puni tekst

A novel walker with mechanically established walking and standing mechanism (str. 927-931)

Raša Andrejević, Goran Šiniković, Miša Stojićević, Miodrag Stoimenov, Ljubomir Miladinović, Branislav Popkonstantinović, Gordana Ostojić, Stevan Stankovski
Izvorni znanstveni članak


Experimental tool life tests of indexable inserts for stainless steel machining (str. 933-940)

Robert Čep, Adam Janásek, Aleš Slíva, Miroslav Neslušan, Martin Binder
Izvorni znanstveni članak


Analytical and numerical stress analysis of the rotary kiln ring (str. 941-946)

Alma Žiga, Aleksandar Karač, Dušan Vukojević
Izvorni znanstveni članak


Critical PPP/PFI project success criteria for public sector clients (str. 947-954)

Danijel Kušljić, Saša Marenjak
Izvorni znanstveni članak


Neural network based estimation of resonant frequency of an equilateral triangular microstrip patch antenna (str. 955-960)

Kamil Yavuz Kapusuz, Hakan Tora, Sultan Can
Izvorni znanstveni članak


Volatility forecast based on intelligent EGARCH error correction model (str. 961-968)

Liqiang Hou, Shanlin Yang
Izvorni znanstveni članak


A novel load flow algorithm for radial distribution networks with dispersed generation (str. 969-977)

Rene Prenc, Davor Škrlec, Vitomir Komen
Izvorni znanstveni članak


Fluvial deposition in groyne fields of the middle course of the Danube River (str. 979-983)

Radovan Savić, Gabrijel Ondrašek, Atila Bezdan, Ljubomir Letić, Vesna Nikolić
Izvorni znanstveni članak


Estimating a PDF of parameters of oxide inclusions on fatigue fracture surface of standardized specimen (str. 985-993)

Ana Bižal, Jernej Klemenc, Matija Fajdiga
Izvorni znanstveni članak


Determining the stability of novel external fixator by using measuring system Aramis (str. 995-999)

Arsen Pavić, Janoš Kodvanj, Martin Surjak
Izvorni znanstveni članak


Comparative analysis of limit bearing capacity of frames depending on the character of the load (str. 1001-1009)

Bojan Milošević, Marina Mijalković, Žarko Petrović, Mirza Hadžimujović, Biljana Mladenović
Izvorni znanstveni članak


Identification of injury risk in building construction – education, experience and type of work (str. 1011-1017)

Vladimir Mučenski, Igor Peško, Milan Trivunić, Goran Cirović, Jasmina Dražić
Izvorni znanstveni članak


Predicting of milling forces in a virtual manufacturing system (str. 1027-1035)

Branko Kokotović, Miloš Glavonjić
Izvorni znanstveni članak


The level of correlation between cultural values and system of customer relationship management (str. 1037-1042)

Stevan Milisavljević, Slavica Mitrović, Leposava Grubić Nešić, Goran Šimunović, Dražan Kozak, Aco Antić
Izvorni znanstveni članak


Synchronized phasor measurements in a dual layer hybrid state estimator (str. 1043-1050)

Vedran Kirincic, Srdjan Skok, Hrvoje Bulat
Izvorni znanstveni članak


Ranking of factors on efficiency and effectiveness of the process quality management system certification according to the external auditors' evaluation (str. 1051-1055)

Đuro Tunjić, Leon Maglić, Živko Kondić, Milan Kljajin, Veljko Kondić
Izvorni znanstveni članak


Comparison of complexity indicators for assessing general process structures (str. 1057-1062)

Vladimir Modrak, David Marton, Slavomir Bednar
Izvorni znanstveni članak


Real time contour based ceramic tile edge and corner defects detection (str. 1063-1070)

Tomislav Matić, Ivan Vidović, Željko Hocenski
Izvorni znanstveni članak


A combined principal component analysis-regression analysis model to study the effect on technical efficiency of bad loans in bank industry (str. 1071-1075)

Omid Mashhadifarahani, Narges Rezavi, Loghman Hatami-Shirkouhi
Izvorni znanstveni članak


Influence of cutting parameters and conditions onto surface hardness of Duplex Stainless Steel after turning process (str. 1077-1080)

Grzegorz Krolczyk, Stanislaw Legutko, Antun Stoić
Izvorni znanstveni članak


Use of coolants and lubricants in hard machining (str. 1081-1086)

János Kundrák, Gyula Varga
Prethodno priopćenje


Compression methods for image processing implementation into the low capacity devices (str. 1087-1090)

Roman Slaby, Radim Hercik, Zdenek Machacek
Prethodno priopćenje


Structural life assessment of oil rig pipes made of API J55 steel by high frequency welding (str. 1091-1094)

Ljubica Lazić Vulićević, Miodrag Arsić, Živče Šarkoćević, Aleksandar Sedmak, Marko Rakin
Prethodno priopćenje


Production and application of metal foams in casting technology (str. 1095-1102)

Branko Bauer, Slobodan Kralj, Matija Bušić
Pregledni rad


LinuxCNC – the enhanced machine controller: application and an overview (str. 1103-1110)

Tomislav Staroveški, Danko Brezak, Toma Udiljak
Pregledni rad


Application of geophysical investigations in underground engineering (str. 1111-1117)

Meho Saša Kovačević, Danijela Marčić, Mario Gazdek
Pregledni rad


Critical measures of success for a software project (str. 1119-1127)

Ninoslav Slavek, Damir Blažević, Krešimir Nenadić
Stručni rad


Posjeta: 89.079 *