hrcak mascot   Srce   HID

Metallurgy, Vol. 52 No. 3, 2013


Metallurgy,Vol. 52 No. 3
Publication date: July 2013

Published on HRČAK: 24 January 2013
Table of contents Full text
Simulation of the casting process - a powerful tool for enhanced design of the cutting teeth in surface mining (str.293-296) englishpdf 1 MB
R. Slavkovic, Z. Jugovic, D. Kozak, A. Veg, R. Radisa, S. Dragicevic, M. Popovic
Original scientific paper
 
Influence of temperature and chemical composition on phase transformations of selected oxide melts (str.297-300) englishpdf 721 KB
R. Dudek, S. Rosypalová, J. Dobrovská
Original scientific paper
 
Loss of aluminium during the process of Ti-Al-V alloy smelting in a vacuum induction melting (VIM) furnace (str.301-304) englishpdf 935 KB
L. Blacha, G. Siwiec, B. Oleksiak
Original scientific paper
 
Microstructure evolution and thermal stability of rapidly solidified Al-Ni-Co-RE alloy (str.305-308) englishpdf 863 KB
B. Karpe, A. Nagode, B. Kosec, A. Stoić, M. Dolenec, M. Bizjak
Original scientific paper
 
Non-alloyed Ni3Al based alloys – preparation and evaluation of mechanical properties (str.309-312) englishpdf 807 KB
J. Malcharcziková, F. Chmelík, J. Pešička, M. Kursa, M. Pohludka
Original scientific paper
 
The influence of testing methodology and changes of microstructural parameters on resistance of duplex steel to sulphide stress cracking (str.313-316) englishpdf 738 KB
P. Jonšta, J. Sojka, K. Matocha, Z. Jonšta
Original scientific paper
 
Microstructural investigation of the heat-affected zone of simulated welded joint of P91 steel (str.317-320) englishpdf 921 KB
T. Vuherer, M. Dunđer, Lj. Milović, M. Zrilić, I. Samardžić
Original scientific paper
 
Theoretical and experimental contributions regarding the impact on work environment of welding processes in MIG / MAG protective gas medium (str.321-324) englishpdf 812 KB
Gh. Amza, M. Groza Dragomir, S. Paise
Original scientific paper
 
Determination of energy dissipation and process instability in various alloys on the basis of plastometric tests (str.325-328) englishpdf 907 KB
T. Kubina, J. Kliber, L. Kunčická, M. Berková, J. Horsinka, J. Bořuta
Original scientific paper
 
Slags from steel production: Properties and their utilization (str.329-333) englishpdf 796 KB
J. Vlcek, V. Tomkova, H. Ovcacikova, F. Ovcacik, M. Topinkova, V. Matejka
Preliminary communication
 
Wettability in the liquid Cu-Ag alloy – fireproof material – gas phase system (str.334-336) englishpdf 712 KB
G. Siwiec, B. Oleksiak, P. Folęga, T. Matuła
Preliminary communication
 
Rhodium platings – experimental study (str.337-340) englishpdf 750 KB
R. Rudolf, B. Budić, D. Stamenković, M. Čolić, A. Ivanič, B. Kosec
Preliminary communication
 
Determination of electroless deposition by chemical nickeling (str.341-344) englishpdf 902 KB
M. Badida, M. Gombár, L. Sobotová, J. Kmec
Preliminary communication
 
Porous ceramic - metal composites obtained by infiltration methods (str.345-348) englishpdf 747 KB
A. Boczkowska, P. Chabera, A. J. Dolata, M. Dyzia, A. Oziębło
Preliminary communication
 
Effect of process parameters on natural aging in a 1004 STEEL (str.349-351) englishpdf 1 MB
L. Guerra-Fuentes, A. Juarez-Hernandez, M. A. L. Hernandez-Rodriguez, M. Herrera-Trejo
Preliminary communication
 
Resistance of weldclads made by flux-cored arc welding technology against erosive wear (str.352-354) englishpdf 882 KB
I. Pernis, J. Kasala, D. Žabecká
Preliminary communication
 
Characterization of chemical heterogeneity of the welded joint of two steels by modelling of diffusion processes (str.355-358) englishpdf 924 KB
L. Řeháčková, J. Dobrovská, J. Kalousek
Preliminary communication
 
Hammer forging process of lever drop forging from AZ31 magnesium alloy (str.359-362) englishpdf 889 KB
A. Gontarz, Z. Pater, K. Drozdowski
Preliminary communication
 
The technology of variable-pitch cone worms in plastic extruding presses (str.363-367) englishpdf 982 KB
T. Nieszporek, P. Boral
Preliminary communication
 
Effect of heat treatment on the wear and corrosion behaviors of a gray cast iron coated with a COLMONOY 88 alloy deposited by high velocity oxygen fuel (HVOF) thermal spray (str.368-370) englishpdf 725 KB
A. Öz, R. Samur, H. Mindivan, A. Demir, S. Sagiroglu, A. K. Yakut
Preliminary communication
 
Electrochemical behavior of guidewires made of X10CrNi 18-8 STEEL (str.371-374) englishpdf 858 KB
W. Walke, J. Przondziono
Preliminary communication
 
Calcium phosphate formation from sea urchin - (brissus latecarinatus) via modified mechano-chemical (ultrasonic) conversion method (str.375-378) englishpdf 956 KB
R. Samur, L. Ozyegin, D. Agaogullari, F. N. Oktar, S. Agathopoulos, C. Kalkandelen, I. Duman, B. Ben-Nissan
Preliminary communication
 
Prediction of metal corrosion by neural networks (str.379-381) englishpdf 988 KB
Z. Jančíková, O. Zimný, P. Koštial
Preliminary communication
 
Load capacity of hardened gear wheels machined with cubic boron nitride (CBN) wedges (str.383-386) englishpdf 875 KB
R. Talar, A. Stoić
Preliminary communication
 
Examples of law of seismic wave attenuation (str.387-390) englishpdf 903 KB
Z. Kaláb, B. Pandula, M. Stolárik, J. Kondela
Preliminary communication
 
A methodology for determining and controlling the buffers before floating bottlenecks in heavy machinery production (str.391-394) englishpdf 855 KB
R. Lenort, R. Klepek, P. Wicher, P. Besta
Preliminary communication
 
The application of recycled aluminum and plastics in environmental protection (str.395-398) englishpdf 761 KB
G. Tepić, T. Pejakov, B. Lalić, V. Vukadinović, S. Milisavljević
Review article
 
Welding of rails with new technology of arc welding (str.399-402) englishpdf 847 KB
D. Bajic, G. Vladimirovich Kuzmenko, I. Samardžić
Review article
 
Progress in the use of the modern research equipment at the institute of metals and technology in Ljubljana (str.403-409) englishpdf 975 KB
M. Godec
Review article
 
Benchmarking research of steel companies in Europe (str.410-412) englishpdf 813 KB
M. Antošová, A. Csikósová, K. Čulková, A. Seňová
Review article
 
Characteristic of iron and steel industry in terms of membership in the European Union (str.413-416) englishpdf 709 KB
Z. Skuza, R. Prusak, C. Kolmasiak
Review article
 
Restructuring of steelworks in direct research (str.417-420) englishpdf 865 KB
B. Gajdzik
Review article
 
The road of Polish steelworks towards market success –changes after restructuring process (str.421-424) englishpdf 823 KB
B. Gajdzik
Review article
 
The analysis of the correlation between the economic growth and crude steel production in the period 1991-2011 (str.425-428) englishpdf 1 MB
G. Dobrotă, C. Căruntu
Review article
 
Simulation model of metallurgical production management (str.429-431) englishpdf 855 KB
P. Šnapka, M. Mikušová, K. Janovská, A. Samolejová
Professional paper
 
Visits: 40.220 *