Skip to the main content

Metallurgy , Vol. 60 No. 3-4, 2021.

  • Publication date: 01.07.2021.
  • Published on HRČAK: 21.04.2021.

Table of contents

Full text

The quality of coke and its consumption blast furnace process (page 181-184)

E. Kardas, R. Prusak
Original scientific paper


Study on distribution of sulfur element in blast furnace (BF) process with different pellet proportions (page 185-187)

W. Deng, L. Zhang, D. Cang
Original scientific paper


Process design and life anylysis of tundish lining (page 191-194)

J. H. Zhang, Y. X. Chen, D. Z. Yang
Original scientific paper


Simulation study on the effect of riser heating mode on solidification of flat ingot head (page 195-197)

S. M. Jia, L. Miao, C. J. Wu, D. Xu
Original scientific paper


Effect of Cr2O3 on crystallization of CaO-MgO-Al2O3-SiO2(CMAS) slag glass-ceramics (page 198-200)

H. H. Yu, X. Li, S. M. Wang, Q. Z. Liu, H. Liu
Original scientific paper


Adaptive neural event-triggered design for the molten steel level in a strip casting process (page 205-208)

Y. J. Zhang, L. B. Wu
Original scientific paper


Kinetics of gas emission from aluminosilicates used as a relaxing additive for moulding and core sands (page 209-212)

A. Bobrowski, D. Drożyński, K. Kaczmarska, B. Grabowska, S. Cukrowicz
Original scientific paper


Analysis on temperature field after angle steel’s controlled cooling (page 213-215)

Y. Gao, L. Y. Huang, C. Chen
Original scientific paper


Effect of hot rolling temperature on microstructures and textures of grain oriented silicon steel (page 216-218)

C. J. Wang, Q. Guo, Y. Y. Shao
Original scientific paper


Effect of pouring temperature on impact toughness on brass (Cu-Zn) through metal casting (page 223-226)

Iqbal ., N. Ali, H. Husin, Akhyar ., Khairil ., A. Farhan
Original scientific paper


Effect of aluminum alloy wheel forging and spinning process parameters on forming force (page 227-229)

Y. J. Lu, X. D. Shu
Original scientific paper


Structural analysis of sheet nickel welded joints (page 230-232)

M. Radoń, Z. A. Opiekun, A. Dec
Original scientific paper


Analysis on stress and strain after angle steel’s controlled cooling (page 233-236)

Y. Gao, L. Y. Huang, C. Chen
Original scientific paper


Effect of solid solution treatment on microstructure and mechanical properties of extruded MgY12Zn2,5 magnesium alloys (page 237-240)

W. Liu, X. D. Shu, G. X. Zhou, X. Z. Du, Y. J. Lang, Y. X. Xia
Original scientific paper


Effect of process parameters on the surface forming accuracy of step of hollow step shaft formed by three-roll skew rolling (page 241-244)

J. N. Shi, X. D. Shu, S. Zhang, J. T. Wang, Y. X. Xia, C. Q. Ye
Original scientific paper


Optimization of deep drawing process parameters of 304 stainless steel (page 245-248)

Sh. Xu, S. H. Zheng, Sh. Z. Yang, Q. H. Yang
Original scientific paper


Shot peening effect on surface properties and pitting corrosion resistance of biomedical structural steel AISI 316L (page 249-252)

R. I. Yakin, P. T. Iswanto, E. U. K. Maliwemu
Original scientific paper


Study on laser surface quenching structure and hardness of C45 steel (page 253-256)

S. Y. Chen, Y. X. Chen, S. F. Jiao, L. Zhong, L. Gao, L. Miao
Original scientific paper


Constitutive model of AISI 1035 at high temperature (page 257-260)

J. F. Jin, G. Song, H. C. Ji, W. C. Pei
Original scientific paper


Research on model of 6005A aluminum alloy (page 261-264)

H. Q. Zhang, H. C. Ji, W. C. Pei, Y. G. Li
Original scientific paper


High temperature constitutive model of 6005A aluminum alloy (page 265-268)

R. Yao, H. C. Ji, J. F. Jin, X. Y. Shao, H. Y. Long
Original scientific paper


Constitutive relationship of 7075 aluminum alloy based on modified Zerilli-Armstrong (M - ZA) model (page 269-272)

Z. Ma, H. C. Ji, W. C. Pei, S. F. Wang, Y. G. Li
Original scientific paper


Electroplastic effect in magnesium alloy AZ31 using supercapacitors (page 273-276)

Z. Zimniak
Original scientific paper


Constitutive relationship of TC4 titanium alloy based on back propagating (BP) neural network (NN) (page 277-280)

Z. S. Peng, H. C. Ji, W. C. Pei, B. Y. Liu, G. Song
Original scientific paper


Research on calculation model of rolling force in twin roll inclined strip casting process (page 281-283)

J. S. Wu, Y. J. Zhang
Original scientific paper


Acknowledgement to reviewers, Metalurgija 60 (2021) 1-4, 1-464 (page 284-284)

Ilija Mamuzić
Acknowledgement


Comparative analysis of graphite inclusions in chrome cast iron structure (page 285-288)

A. Z. Issagulov, V. Yu. Kulikov, Sv. S. Kvon, M. K. Ibatov, S. K. Arinova, A. M. Dostayeva
Preliminary communication


Thermodynamic interaction of concentrate, sludge and mill scale from carbon (page 289-291)

M. Mukhametkhan, Y. Mukhametkhan, S. Tleugabulov, G. Zhabalova, V. Shevko
Preliminary communication


Modeling method of phase equilibrium in metal-slag system (page 292-294)

V. Tolokonnikova, S. Baisanov, G. Narikbayeva, I. Korsukova, Ye. Mukhambetgaliyev
Preliminary communication


Studying properties of chrome cast irons modified with titanium carbide (page 299-302)

A. Z. Issagulov, V. Yu. Kulikov, Sv. S. Kvon, M. K. Ibatov, Ye. P. Shcherbakova
Preliminary communication


Assessment of dissociation rate of FeCr2O4 using the Bjerrum-Guggenheim coefficient (page 303-305)

V. Tolokonnikova, S. Baisanov, G. Narikbayeva, I. Narikbayeva
Preliminary communication


Complete thermodynamic analysis of the interaction of iron phosphate (FePO4) with hydrogen (H2) and carbon monoxide (CO) (page 306-308)

Ye. Mukhametkhan, M. Mukhametkhan, S. Tleugabulov, G. Zhabalova, V. Shevko
Preliminary communication


The main reasons for increased copper losses with slags from vanyukov furnace (page 309-312)

M. A. Dyussebekova, B. K. Kenzhaliyev, S. A. Kvyatkovskiy, E. A. Sit’ko, D. Nurkhadianto
Preliminary communication


Research possibility of involvement Kazakhstani nickel ore in the metallurgical treatment (page 313-316)

B. Kelamanov, Ye. Samuratov, A. Akuov, A. Abdirashit, A. Burumbayev, R. Orynbassar
Preliminary communication


Modeling of stress-deformed conditions of heavy loaded elements of new equipment of metal injection molding technologies (page 317-320)

S. Mashekov, N. Sembayev, A. Mashekova, B. Bazarbay, Zh. Turgunov
Preliminary communication


Method of preventing deposits on the inner surface of circulating water pipelines of ferroalloy electric furnace cooling systems (page 321-324)

A. D. Mekhtiyev, Ye. Zh. Sarsikeyev, A. V. Аtyaksheva, A. D. Аtyaksheva, T. S. Gerassimenko, A. D. Alkina
Preliminary communication


Strain state and microstructure evolution of AISI-316 austenitic stainless steel during high-pressure torsion (HPT) process in the new stamp design (page 325-328)

A. Volokitin, I. Volokitina, E. Panin, A. Naizabekov, S. Lezhnev
Preliminary communication


Determination of technological parameters for continiuous casting of a hollow pipe billet (page 329-331)

A. Zhakupov, A. Bogomolov, A. Zhakupova, S. Abdulina, V. Salina
Preliminary communication


Research of electrical resistance and beginning softening temperature of high-ash coals for melting of complex alloy (page 332-334)

Ye. Mukhambetgaliyev, T. Zhuniskaliyev, S. Baisanov
Preliminary communication


Study of the deformation state during the pulling of the workpiece in a special die (page 335-338)

Zh. A. Ashkeyev, M. Zh. Abishkenov, S. A. Mashekov, A. Kawałek, K. A. Nogaev
Preliminary communication


Recycling of stainless steel bar scrap by radial-shear rolling to obtain a gradient ultrafine-grained structure (page 339-342)

S. Lezhnev, A. Naizabekov, E. Panin, I. Volokitina, D. Kuis
Preliminary communication


Method of restoring pivot connections cast iron bushings of heat engine with external heat supply (page 343-346)

P. A. Kropachev, A. D. Mekhtiyev, F. N. Bulatbayev, Y. Zh. Sarsikeyev, A. V. Yurchenko
Preliminary communication


Strengthening elements of steel structures for controlling fatigue fracture (page 347-350)

P. A. Kropachev, A. D. Mekhtiyev, Y. Zh. Sarsikeyev
Preliminary communication


Determination of the intensity of abrasive chafe by different chafeing materials (page 351-354)

G. A. Akimbek, B. K. Aliyarov, Sh. A. Akimbekova, A. Zhauyt
Preliminary communication


Study on the best method of controlled cooling for rolled angle steel (page 359-361)

L. Y. Huang, Y. Gao, C. Chen
Preliminary communication


Development of a method for calculating the degree of use of the plasticity resource (DUPR) when rolling on a new continuous mill (page 362-364)

M. M. Azilkiyasheva, S. B. Shayakhmetov, G. B. Bakyt, B. T. Kopenov, G. A. Smailova, Y. Y. Baubekov, A. Zhauyt
Preliminary communication


Study on laser welding of dual phase steel (page 365-367)

F. B. Chang, Y. Gao, L. Gao, L. Y. Huang
Preliminary communication


Experimental measurements of scale adhesion for a pre-oxidized steel charge (page 368-370)

J. Boryca, C. Kolmasiak, T. Wyleciał, D. Urbaniak, H. Otwinowski
Preliminary communication


Electrical characteristics of charge mixtures for melting rich titanium slag (RTS) (page 371-373)

O. Sariev, N. Nurgali, G. Beketova, M. Zhanabayev, T. Kainenova, A. Zhakan
Preliminary communication


Phase composition of titanium-containing raw materials depending on its titanium oxide content (page 374-376)

N. Nurgali, O. Sariev, A. Mukhambetkaliyev, B. Momenov, A. Kuandykova, R. Abdrashev
Preliminary communication


Research of ultra-dispersed opal-quartz-carbonate bentonite clay for coating welding electrodes UONI-13/55 (page 377-380)

G. K. Daumova, Yu. I. Lopukhov, E. M. Azbanbayev, N. V. Seraya, A. V. Russakova
Preliminary communication


Mechanical properties of brass sheets (page 381-383)

A. Płachta, B. Oleksiak, G. Siwiec, G. Junak
Preliminary communication


Application methods and selected properties of zinc flake coatings (page 384-386)

B. Oleksiak, M. Kuczyńska-Chałada, R. Poloczek
Preliminary communication


Development of hot rolling technology using the method of physical modeling (page 387-390)

A. Zhauyt, A. Bukayeva, Z. Tursymbekova, G. Bulekbayeva, Zh. Begendikova, G. Mambetaliyeva, M. Chazhabayeva
Preliminary communication


About the possibility of copper-bearing ore flotation processing of with the use of a combined flotation reagent (page 391-394)

L. Semushkina, G. Abdykirova, D. Turysbekov, S. Narbekova, Zh. Kaldybaeva, A. Mukhamedilova
Preliminary communication


Effect of the water-air emulsion size of the foaming agent solution on the non-ferrous metal minerals flotation ability (page 395-398)

D. Turysbekov, N. Tussupbayev, L. Semushkina, S. Narbekova, Zh. Kaldybaeva, A. Mambetaliyeva
Preliminary communication


Solidification of the Al alloy composite reinforced with graphite particles (page 399-402)

C. Kolmasiak, M. Łągiewka
Preliminary communication


Investigation of aluminum-titanium alloys production and labor safety in metal smelting process (page 403-406)

A. M. Dostayeva, I. I. Erahtina, N. R. Zholmagambetov, N. A. Medeubayev, S. R. Zholmagambetov
Preliminary communication


Research of kinetics of zinc leaching with sulfuric acid from smithsonite (page 407-410)

R. A. Ramazanova, S. V. Mamyachenkov, N. V. Seraya, G. K. Daumova, R. A. Aubakirova, Zh. T. Bagasharova
Preliminary communication


Processing of titanium production sludge with the extraction of titanium dioxide (page 411-414)

A. A. Ultarakova, A. M. Yessengaziyev, E. I. Kuldeyev, K. K. Kassymzhanov, O. Kh. Uldakhanov
Preliminary communication


Influence of temperature on the strength of alumina-containing raw materials (page 415-418)

A. E. Burdonov, P. K. Fedotov, Y. V. Novikov, A. A. Garashchenko, M. P. Kuzmin, A. V. Rasskazova
Preliminary communication


Use of Si-composite aspiration dusts production in the creation of thin-film anodes (page 419-422)

G. Dairbekova, B. Zhautikov, N. Zobnin, D. Bekmagambetov, D. Tolubayeva
Preliminary communication


Research of biochemical gold recovery method using high-arsenic raw materials (page 423-426)

A. K. Koizhanova, A. N. Berkinbayeva, G. V. Sedelnikova, B. K. Kenzhaliyev, M. N. Azlan, D. R. Magomedov, Y. M. Efremova (Dyo)
Preliminary communication


Extruding aluminum bars on a new structure radial shear mill (page 427-430)

S. Mashekov, E. Nurtazaev, A. Mashekova, M. Abishkenov
Preliminary communication


Risk – threats and opportunities in metallurgical production (page 437-440)

T. Karkoszka
Preliminary communication


Composite centrifugal castings after remelting (page 441-443)

M. Łągiewka, C. Kolmasiak
Preliminary communication


The recovery of metals from electronic waste: A review (page 444-446)

Bm Thethwayo
Review article


Thermodynamic and electrophysical investigation of nanostructured copper-zinc manganite of lanthanum and lithium LaLi2CuZnMnO6 (page 447-450)

B. K. Kasenov, Sh. B. Kasenova, Zh. I. Sagintaeva, E. E. Kuanyshbekov, A. A. Mukhtar, B. T. Ermagambet, A. Nukhuly, Zh. S. Bekturganov, A. K. Zeinidenov
Review article


Casting production management system (page 451-453)

P. Malinowski
Review article


Calculation of thermodynamic properties of earth metals − copper-zinc (Cu-Zn) (page 454-456)

B. K. Kassenov, Sh. B. Kassenova, Zh. I. Sagintaeva, B. T. Ermagambet, E. E. Kuanyshbekov, A. A. Mukhtar
Review article


In memoriam: Prof., dr. sc. Franc Vodopivec, 1931. – 2021. (page 461-462)

Ilija Mamuzić
In memoriam, Obituary


In memoriam: Prof., dr. sc. Josip Krajcar, 1927. – 2020. (page 463-464)

Ilija Mamuzić
In memoriam, Obituary


Visits: 95.893 *