Skip to the main content

Metallurgy , Vol. 61 No. 3-4, 2022.

  • Publication date: 01.07.2022.
  • Published on HRČAK: 18.03.2022.

Table of contents

Full text

A prediction method of silicon content in hot metal of blast furnace (page 581-584)

K. Yang, C. Hu
Original scientific paper


The interaction of the argon curtain at the interface: metal-slag in a tundish (page 585-588)

T. Merder, J. Pieprzyca, M. Saternus, M. Tkadlecková
Original scientific paper


Experimental study on sinter pot test with added light burnt dolomite in sintering production (page 589-591)

Z. G. Guan, Z. J. He
Original scientific paper


Numerical simulation study on the influence of current stabilizer on tundish flow field (page 592-594)

Y. F. Yao, Z. S. Zhang
Original scientific paper


Effect of iron oxide content on dephosphorization behavior of slag gasification (page 595-598)

S. H. Wang, H. K. Sun, S. Tong, C. X. Li, Y. K. Xue, Y. Zhang
Original scientific paper


Filtration of liquid uphill casted steel (page 599-602)

K. Janiszewski
Original scientific paper


Graphite crystallizer and its surface quality as a factor affecting the copper continuous casting process (page 603-605)

S. Kordaszewski, P. Kwasniewski, P. Strzepek, G. Kiesiewicz, W. Sciezor, M. Sadzikowski, K. Franczak
Original scientific paper


The effect of organic acids as leaching agents for hydrometallurgical recovery of metals from PCBs (page 609-612)

M. Lisinska, B. Gajda, M. Saternus, S. Brozová, T. Wojtal, M. Rzelewska-Piekut
Original scientific paper


Effect of process factors on solidification process of 10B21 steel bloom (page 613-615)

X. K. Yang, D. Xu, B. Zheng, X. Yin
Original scientific paper


Experimental investigation on hardness, tensile strength, and microstructure of Al-3,1Cu cast-alloy after T6-tempered (page 616-618)

Akhyar ;, P. T. Iswanto, R. Syaputra, A. Farhan
Original scientific paper


Optimalization of the metallurgical synthesis parameters of CuZn37 brass with nickel and silicon alloy additives (page 619-621)

S. Kordaszewski, P. Kwasniewski, G. Kiesiewicz, K. Franczak, W. Sciezor, R. Kowal, P. Strzepek
Original scientific paper


Metallurgical synthesis of modified EN-AW 6082 alloy with different Mg and Si content ratio and research on basic mechanical and electrical properties of obtained materials (page 622-624)

G. Kiesiewicz, A. Mamala, W. Sciezor, P. Kwasniewski, A. Kawecki, M. Sadzikowski, K. Franczak
Original scientific paper


Correlation between macrosegregation and mechanical properties in EN AW-6060 aluminium alloy billets obtained by continuous casting (page 625-627)

R. Kowal, A. Mamala, W. Sciezor, P. Kwasniewski, A. Nowak, S. Kordaszewski, K. Franczak
Original scientific paper


Determination of the properties of AlCu4,5Mg3 alloy obtained in the continuous casting line (page 628-630)

W. Sciezor, R. Kowal, K. Franczak, G. Kiesiewicz, P. Kwasniewski, S. Kordaszewski, M. Sadzikowski
Original scientific paper


Research on the continuous casting process of CuCrZr alloys with the addition of scandium dedicated for resistance welding electrodes (page 631-633)

K. Franczak, P. Kwasniewski, G. Kiesiewicz, M. Sadzikowski, W. Sciezor, S. Kordaszewski, D. Kuca
Original scientific paper


Extensive analysis of the ETP grade copper wire drawing force parameters in correlation with the length of the elastic deformation region (page 634-636)

P. Strzepek, A. Mamala, M. Zasadzinska, A. Nowak
Original scientific paper


Effect of freezing on abrasion resistance of cast steel containing 1,1 % C, 16 % Cr, and 0,9 % Mo (page 637-640)

B. Kalandyk, R. Zapała, I. Sulima, J. Kasinska
Original scientific paper


Impact toughness of ASTM A36 low carbon steel by metal active gas (MAG) welding process using different cooling media (page 641-644)

Akhyar ;, A. Farhan, Azwinur ;, Syukran ;, T. A. Fadhilah
Original scientific paper


Characterisation of Cu-CNTs composite electrical properties in elevated temperatures (page 645-648)

G. Kiesiewicz, P. Kwasniewski, T. Knych, E. Sieja-Smaga, K. Franczak, M. Zasadzinska, P. Strzepek
Original scientific paper


Properties of TiO2 coatings applied by atomic layer deposition (ALD) on 100Cr6 steel (page 657-660)

K. Radon-Kobus, M. Madej
Original scientific paper


Influence of coating application parameters on selected properties (page 661-664)

J. Kowalczyk, M. Madej
Original scientific paper


Modification of the Cu-ETP copper surface layer with chromium by physical vapor deposition (PvD) and diffusion annealing (page 673-676)

M. Poreba, M. Pytel, M. Drajewicz, W. Ziaja, M. Góral
Original scientific paper


Structure and thickness of Y2O3 coatings deposited by plasma spray physical vapour deposition (PS-PvD) method on graphite (page 677-680)

M. Góral, M. Poreba, T. Kubaszek, K. Ochał, M. Drajewicz
Original scientific paper


High temperature constitutive model of q345B steel (page 681-684)

W. C. Pei, W. Q. Wu, Y. Hu, H. C. Ji
Original scientific paper


Plastic properties and microstructure evolution of 20CrMoA steel during warm deformation (page 685-688)

Sh. Xu, D. Shu, Zh. L. Shen, L. J. Zhu, J. Zhao
Original scientific paper


Constitutive model of low carbon alloy steel (LCAS) expandable tubular (page 689-692)

Y. P. Li, J. M. Zhao, H. C. Ji, J. T. Wu, W. C. Pei
Original scientific paper


Effect of process parameters on microstructure of 42CrMo steel ball hot skew rolling (page 693-696)

X. S. Gao, X. D. Shu, X. Chen, L. Ding, B. S. Sun
Original scientific paper


Effect of hot rolling reduction on microstructures and textures of grain oriented silicon steel (page 697-699)

Y. Y. Shao, Z. W. Jia, Q. Guo
Original scientific paper


Micromechanical properties of cryo-rolled (CR) aluminum alloy Al0,6Mg0,35Si (page 700-702)

M. Abishkenov, Z. Ashkeyev, A. Naizabekov, K. Nogaev, L. Uktayeva, S. Kydyrbayeva, G. Issabekova
Original scientific paper


Research on metal reflow law of three roll skew rolling (TRSR) hollow axle (page 703-705)

J. T. Wang, X. D. Shu, C. Q. Ye, Y. X. Xia, S. Zhang, S. X. Li
Original scientific paper


Study on the variation law of temperature field in three-roll skew rolling of variable diameter specimen (page 706-708)

X. G. Chen, X. D. Shu, J. N. Shi
Original scientific paper


Research on logarithmic spiral roll profile in hot rolling (page 709-712)

F. B. Lian, S. W. Wang, H. Song, M. X. Gao, J. Yang, Y. Zhang, L. H. Fu
Original scientific paper


Effect of feed rate on forming quality of cross wedge rolling of gear shaft teeth (page 713-716)

X. G. Chen, X. D. Shu, Q. J. Lian
Original scientific paper


Pipeline offline trough cleaning technology (page 717-720)

S. Cai, F. Y. Zhu, H. C. Ji, Z. L. Zhao, W. C. Pei, J. Y. Zhang
Original scientific paper


Johnson-Cook model for TC4 titanium alloy based on compression experiment (page 721-724)

Z. L. Zhao, H. C. Ji, J. M. Zhao, B. X. Liu, W. C. Pei
Original scientific paper


Effect of process parameters on forming quality of Mg alloy(MZ21)-Al alloy(7075) composite pipe (page 725-728)

J. B. Zheng, X. D. Shu, S. Zhang, Q. Y. Lu
Original scientific paper


Constitutive model of 7075 aluminum at high temperature (page 729-732)

W. C. Pei, J. H. Qiao, B. X. Liu, H. C. Ji
Original scientific paper


Research on integrated forming process of three-roll reducing and thickening of necking section for thin-walled tube of aluminum alloy 2A12 (page 733-736)

Y. X. Xia, X. D. Shu, S. Zhang, J. T. Wang, C. Q. Ye
Original scientific paper


Influence of plastic deformation on the change of electrical and mechanical properties oxygen-free (OF) copper and copper alloy wires (page 737-740)

T. Knych, A. Mamala, A. Kawecki, B. Smyrak, K. Korzen, E. Sieja-Smaga
Original scientific paper


Research on properties of multi-core superconducting wires made from materials based on magnesium and boron (MgB2) (page 741-744)

A. Kawecki, E. Sieja-Smaga, A. Brudny, A. Morawski, T. Cetner, R. Kowal
Original scientific paper


Susceptibility to deep processing in the wire drawing process of ETP and OF grade copper (page 749-752)

B. Smyrak, M. Zasadzinska, T. Knych, A. Mamala, A. Kawecki, M. Walkowicz, P. Strzepek
Original scientific paper


New generation of cable screw connectors for electrical power engineering systems (page 757-760)

K. Korzen, S. Kordaszewski, B. Jurkiewicz, A. Kawecki, P. Strzepek, E. Bozek, B. Babiarz
Original scientific paper


Impurities of the surface layer of the exploited etp grade copper railway traction scrap and its influence on the chemical composition after metallurgical synthesis (page 761-763)

M. Sadzikowski, G. Kiesiewicz, P. Kwasniewski, K. Franczak, S. Kordaszewski, W. Sciezor, R. Pestrak
Original scientific paper


Development of carbon ferrochrome smelting technology using high-ash coal (page 764-766)

Ye. Kuatbay, A. Nurumgaliyev, T. Zhuniskaliyev, S. Smailov, A. Yerzhanov, G. Bulekova
Preliminary communication


Beneficiation of chrome slurry tailings at Donskoy mining and beneficiation plant (DMBP) JSC to produce hard pellets (page 767-770)

I. Bondarenko, N. Serzhanova, Y. Kuldeev, N. Sadykov, A. Tastanova
Preliminary communication


The possibility of involvement in ferroalloy conversion of nickel ores of Kazakhstan (page 771-773)

B. Kelamanov, S. Smailov, A. Yerzhanov, A. Apendina, R. Adilhanov, S. Kabylkhanov
Preliminary communication


Defects analysis of copper wires manufactured in industrial conditions (page 774-776)

M. Zasadzinska, B. Smyrak, T. Knych, P. Strzepek
Preliminary communication


Improvement of the technology related gold-containing raw materials with the use of ultramicroheterogeneous flotoreagent (page 777-780)

A. A. Mukhanova, A. M. Yessengaziyev, M. B. Barmenshinova, N. O. Samenova, G. A. Toilanbay, K. N. Toktagulova
Preliminary communication


Influence of the continuous casting process of TIN-ZINC-LEAD bronze on the wear of the graphite crystallizer (page 785-788)

A. Brudny, J. Kulasa, B. Cwolek, W. Malec, B. Juszczyk
Preliminary communication


Intensification of copper leaching from heaps using biological oxidation (page 789-792)

A. K. Koizhanova, D. R. Magomedov, E. A. Tastanov, B. K. Kenzhaliyev, G. V. Sedelnikova, A. N. Berkinbayeva
Preliminary communication


Niobium(v) recovery from leaching solution of titanium wastes: kinetic studies (page 793-796)

A. Khabiyev, O. Baigenzhenov, Zh. Korganbayeva, A. Toishybek, T. Chepushtanova, B. Orynbayev
Preliminary communication


Preparation and selected properties of Al88Y8-xFe4+x (x = 0, 1, 2 at. %) Alloys in bulk form (page 797-800)

M. Spilka, W. Łonski, A. Radon, R. Babilas
Preliminary communication


Influence of heat treatment on fatigue properties of 6101 series aluminium alloy wires (page 801-803)

A. Nowak, R. Kowal, E. Sieja-Smaga, P. Strzepek
Preliminary communication


Research of microstructure and phase composition of a new complex alloy – alumosilicomanganese (Al-Si-Mn) (page 804-806)

Ye. Makhambetov, A. Abdirashit, Ye Kuatbay, A. Yerzhanov, G. Issengaliyeva, A. Angsapov
Preliminary communication


Thermodynamic diagrammatic analysis (TDA) of the system Al-Si-Mn-Fe (page 807-809)

Ye. Makhambetov, A. Abdirashit, Ye. Kuatbay, A. Yerzhanov, A. Mukhambetkaliyev, M. Abishkenov
Preliminary communication


Analytical expressions of the Fe -Zr - Si - Al system and phase composition of the complex alloy of ferrum-silicon-zirconium (page 810-812)

D. Yessengaliyev, N. Ubaidulayeva, R. Orynbassar, Zh. Yussupova, M. Abishkenov, S. Kydyrbaeva
Preliminary communication


Effect of temperature on the mechanical properties of X5CrNi18-9 steel (page 813-815)

R. Zapała, B. Kalandyk, P. Pałka
Preliminary communication


Analysis of fracture mechanism of cast steel under hydrostatic pressure (page 816-818)

J. Lachowski, J. Borowiecka-Jamrozek
Preliminary communication


Thermodynamics of integrated deoxidation of steel with a new alloy of aluminum-silicum-manganese (Al - Si - Mn) (page 819-821)

A. Abdirashit, Ye. Makhambetov, T. Tushiyev, A. Nurumgaliyev, S. Smailov
Preliminary communication


Thermodynamic-diagram analysis of the Fe-Si-Al-Cr system with the construction of diagrams of phase relations (page 825-827)

Ye. Zhumagaliev, G. Yerekeyeva, A. Nurumgaliyev, O. Mongolkhan, A. Davletova, G. Sagynbekova
Preliminary communication


Thermodynamic-diagram analysis of the Fe-Si-Al-Mn system with the construction of diagrams of phase relations (page 828-830)

S. Baisanov, V. Tolokonnikova, G. Yerekeyeva, G. Narikbayeva, I. Korsukova
Preliminary communication


Characteristics of CuCrTiAl alloy after plastic deformation (page 831-834)

M. Łagoda, W. Głuchowski, M. Maleta, J. Domagała-Dubiel, M. Sadzikowski
Preliminary communication


Diamond-like carbon (DLC) coatings on roller bearing elements of belt conveyors (page 835-837)

K. Milewski, M. Madej
Preliminary communication


Copper production and trade in Poland during the COVID-19 epidemic (page 838-840)

K. Łakomy, T. Lis
Preliminary communication


Analysis of the vehicle exhaust system corrosion and its effect on the ECO-test result (page 841-844)

T. Šolić, D. Marić, S. Suhi, I. Samardžić
Preliminary communication


Matrix replica-based assessment of the microstructure of primary steam piping elbows after long-term operation (page 845-847)

J. Kasinska, P. Matusiewicz, P. Malinowski, L. Barwicki
Preliminary communication


Autonomous maitenance (AM) in the aspect of improvement work safety in the steel sector in Poland (page 848-850)

J. Furman, T. Małysa
Preliminary communication


Acknowledgement to reviewers Metalurgija 61 (2022) 1-4, 1–896 (page 888-888)

Ilija Mamuzić
Acknowledgement


Visits: 46.553 *